Lexar NM610 PRO 1TB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Lexar
500 GB NVMe drive with 2100 MB/s read and 1600 MB/s write speeds for fast boot and load times
Options 500GB NM610 PRO
The Lexar NM610 PRO is a 500GB internal SSD built in the M.2 2280 form factor. It uses 3D TLC NAND and connects through a PCIe 3.0 x4 lane with NVMe 1.3 support. The drive is made for consumer desktops and laptops that need faster storage than a SATA device can provide.
Sequential reads reach up to 2100 MBps and writes up to 1600 MBps, with random 4KB performance rated at 188,000 IOPS read and 156,000 IOPS write. Endurance is rated at 250TB total bytes written and the mean time between failures is 1,500,000 hours. If your workload demands higher sustained throughput or greater write endurance, this model will not be sufficient.
It suits PC enthusiasts upgrading from a SATA SSD who want a 3.5x speed boost for everyday tasks, gaming loads and content creation. The single-sided 2.25mm height fits most thin laptops and compact boards. Users needing PCIe 4.0 or 5.0 bandwidth, higher capacities or enterprise-grade endurance should look at a different drive.
| Brand | Lexar |
|---|---|
| Series | NM610 |
| Model | LNM610-500RBNA |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4, NVMe |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1600 MBps |
| 4KB Random Read | Up to 188,000 IOPS |
| 4KB Random Write | Up to 156,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported M.2 2280 form factor Get 3.5x the speed of a SATA-based SSD Ideal for PC enthusiasts 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G, duration 0.5 ms, Half Sine Wave |
| Max Vibration Resistance | 10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The 2100 MB/s sequential read figure lets the drive load large games, video projects or OS files noticeably faster than a SATA SSD, while the 1600 MB/s write speed keeps saves and exports moving quickly.
The PCIe 3.0 x4 link carries NVMe 1.3 traffic, so the drive reaches its rated 2100 MB/s read and 1600 MB/s write without being bottlenecked by the bus.
Yes, the 2280 length (80 mm), 22 mm width and 2.25 mm thickness match the standard M.2 slot found in most modern laptops and motherboards.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?