Lexar NM610 PRO 1TB M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.
Lexar
500 GB NVMe drive with 2100 MB/s read and 1600 MB/s write speeds for fast boot and load times
Options 500GB NM610 PRO
The Lexar NM610 PRO is a 500GB internal SSD built in the M.2 2280 form factor. It uses 3D TLC NAND and connects through a PCIe 3.0 x4 lane with NVMe 1.3 support. The drive is made for consumer desktops and laptops that need faster storage than a SATA device can provide.
Sequential reads reach up to 2100 MBps and writes up to 1600 MBps, with random 4KB performance rated at 188,000 IOPS read and 156,000 IOPS write. Endurance is rated at 250TB total bytes written and the mean time between failures is 1,500,000 hours. If your workload demands higher sustained throughput or greater write endurance, this model will not be sufficient.
It suits PC enthusiasts upgrading from a SATA SSD who want a 3.5x speed boost for everyday tasks, gaming loads and content creation. The single-sided 2.25mm height fits most thin laptops and compact boards. Users needing PCIe 4.0 or 5.0 bandwidth, higher capacities or enterprise-grade endurance should look at a different drive.
| Brand | Lexar |
|---|---|
| Series | NM610 |
| Model | LNM610-500RBNA |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4, NVMe |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1600 MBps |
| 4KB Random Read | Up to 188,000 IOPS |
| 4KB Random Write | Up to 156,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | TBW: 250TB High-speed PCIe Gen3 x4 interface: 2100 MB/s read and 1600 MB/s write - NVMe 1.3 supported M.2 2280 form factor Get 3.5x the speed of a SATA-based SSD Ideal for PC enthusiasts 3D NAND Features LDPC (Low-Density Parity Check) Shock and vibration resistant with no moving parts |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G, duration 0.5 ms, Half Sine Wave |
| Max Vibration Resistance | 10~2000 Hz, 1.5mm, 20G, 1 Oct/min, 30 min/axis (X, Y, Z) |
| Height | 2.25mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 9.00g |
Outras versões deste modelo
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
The 2100 MB/s sequential read figure lets the drive load large games, video projects or OS files noticeably faster than a SATA SSD, while the 1600 MB/s write speed keeps saves and exports moving quickly.
The PCIe 3.0 x4 link carries NVMe 1.3 traffic, so the drive reaches its rated 2100 MB/s read and 1600 MB/s write without being bottlenecked by the bus.
Yes, the 2280 length (80 mm), 22 mm width and 2.25 mm thickness match the standard M.2 slot found in most modern laptops and motherboards.
Também nesta secção
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
O que paga, e a moeda em que vê os preços.
Enviado da sua carteira ao finalizar a compra
Apenas informativo — o catálogo está em dólares
Nenhuma moeda corresponde.
Escolha o idioma em que o site lhe fala.
Ainda não tem conta?
Já tem conta?
Não existe reposição automática: esta loja não envia qualquer e-mail, pelo que não há nenhum link de utilização única para pedir. Deixe o endereço na conta e ele será tratado manualmente.
Pedido registado
Não vai chegar nada à sua caixa de entrada — esta loja não envia qualquer e-mail. Alguém trata disto manualmente.
Recordou-se dela?