NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Lian Li
Vertical GPU mounting kit with a 200 mm PCIe 5.0 riser cable, three height settings and dual-angle tilt for ATX cases
Color White
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Lian Li VG4-5-V4W kit mounts a graphics card vertically in cases that support ATX motherboards. It includes a premium PCIe 5.0 riser cable and a bracket with three height adjustments plus a dual-angle tilt function. Integrated RGB lighting adds visual flair while the design accommodates thick GPUs up to four slots wide. This kit suits builders who want to showcase their GPU in a modern chassis.
Your case must provide at least six PCIe expansion slots for standard vertical mounting or seven slots if you plan to use the tilted configuration. Verify that the graphics card I/O area clears the enlarged bracket cutout to avoid interference with HDMI or DisplayPort cables. Remove any factory overclocking button on the card before installation to prevent contact with the adjustable structure. Cards with three full-size DisplayPorts may touch the slot when tilted.
The dual-angle tilt reduces turbulence by moving the GPU away from nearby components, promoting steadier airflow during long sessions. A thinner rubber pad keeps the card seated firmly without upward pressure that could detach the connection. Press the GPU downward during installation so the side latch locks automatically, and always hold the release tab when removing the card to avoid damage. The refined frame also works with many third-party support brackets for added stability.
| Motherboard Compatibility | ATX |
|---|---|
| Side Panel | with Side Window |
| Prepravná hmotnosť | 0.91 kg |
| Rozmery balenia | 235 × 168 × 148 mm |
The kit includes the vertical mounting bracket and a 200mm PCIe 5.0 riser cable, so no separate cable purchase is required.
The supplied 200mm cable is rated for PCIe 5.0 and remains fully compatible with PCIe 3.0 and 4.0 motherboards and graphics cards.
It delivers full PCIe 5.0 bandwidth over the 200mm length while staying backward compatible with PCIe 3.0 and 4.0 hardware, ensuring no throughput loss for modern GPUs.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?