Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

Micron

Micron 9550 PRO 15.36 TB enterprise SSD MTFDLAL15T3THA-1BK1DABYYR

SKU CH-BGJ7-70AKT MPN MTFDLAL15T3THA-1BK1DABYYR

15.36 TB U.2 NVMe 5.0 enterprise SSD with 14 GB/s reads and 10 GB/s writes for AI and data-centre workloads

  • 36 TB capacity supports massive datasets
  • 14 GB/s sequential read accelerates data access
  • 10 GB/s sequential write handles intensive workloads
  • PCIe 5.0 NVMe interface delivers high bandwidth
  • OCP 2.0 and 2.5 support enables advanced telemetry

Micron 9550 PRO 15.36 TB NVMe SSD

The Micron 9550 PRO is a 15.36 TB enterprise solid-state drive built for data centre deployment. It connects through a U.2 PCIe interface running the NVMe 5.0 standard. The drive delivers sequential reads up to 14 GB/s and writes up to 10 GB/s. It targets workloads that demand extreme throughput and low latency.

Suits AI, databases and high-frequency trading

This SSD fits servers handling AI training, performance databases, caching layers, OLTP and high-frequency trading. It supports OCP 2.0 and 2.5 for telemetry and cloud-scale management. Buyers needing less capacity or a different form factor should evaluate other models. It is not designed for consumer desktop use.

U.2 PCIe NVMe 5.0 interface decides fit

The drive uses a U.2 connector with the PCIe NVMe 5.0 protocol. Your server backplane and BIOS must support this exact interface and standard. Verify the slot type and protocol generation before purchase. No other specification overrides this compatibility requirement.

Prednosti

  • 36 TB capacity supports massive datasets
  • 14 GB/s sequential read accelerates data access
  • 10 GB/s sequential write handles intensive workloads
  • PCIe 5.0 NVMe interface delivers high bandwidth
  • OCP 2.0 and 2.5 support enables advanced telemetry

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

Will the U.2 PCIe NVMe 5.0 interface on this Micron 9550 PRO work with my existing PCIe 4.0 backplane?

Yes, the drive is backward compatible with PCIe 4.0 and 3.0 slots, though sequential speeds will be limited to the slower generation's bandwidth.

How can I verify the drive is delivering the rated 14 GB/s read and 10 GB/s write performance after installation?

Run a sequential benchmark such as FIO with a large queue depth; sustained results near 14 GB/s read and 10 GB/s write confirm the PCIe 5.0 link is operating at full speed.

Does the 15.36 TB U.2 SSD ship with a heatsink, mounting screws or power cable, or must I source them separately?

The drive is supplied as a bare U.2 module; any 15 mm heatsink, carrier screws or power cabling required by your server chassis must be purchased separately.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.