Micron
Micron 9550 PRO 15.36 TB enterprise SSD MTFDLAL15T3THA-1BK1DABYYR
15.36 TB U.2 NVMe 5.0 enterprise SSD with 14 GB/s reads and 10 GB/s writes for AI and data-centre workloads
- 36 TB capacity supports massive datasets
- 14 GB/s sequential read accelerates data access
- 10 GB/s sequential write handles intensive workloads
- PCIe 5.0 NVMe interface delivers high bandwidth
- OCP 2.0 and 2.5 support enables advanced telemetry
Micron 9550 PRO 15.36 TB NVMe SSD
The Micron 9550 PRO is a 15.36 TB enterprise solid-state drive built for data centre deployment. It connects through a U.2 PCIe interface running the NVMe 5.0 standard. The drive delivers sequential reads up to 14 GB/s and writes up to 10 GB/s. It targets workloads that demand extreme throughput and low latency.
Suits AI, databases and high-frequency trading
This SSD fits servers handling AI training, performance databases, caching layers, OLTP and high-frequency trading. It supports OCP 2.0 and 2.5 for telemetry and cloud-scale management. Buyers needing less capacity or a different form factor should evaluate other models. It is not designed for consumer desktop use.
U.2 PCIe NVMe 5.0 interface decides fit
The drive uses a U.2 connector with the PCIe NVMe 5.0 protocol. Your server backplane and BIOS must support this exact interface and standard. Verify the slot type and protocol generation before purchase. No other specification overrides this compatibility requirement.
特長
- 36 TB capacity supports massive datasets
- 14 GB/s sequential read accelerates data access
- 10 GB/s sequential write handles intensive workloads
- PCIe 5.0 NVMe interface delivers high bandwidth
- OCP 2.0 and 2.5 support enables advanced telemetry
仕様
この商品の仕様はまだ公開されていません。
この商品に関する質問
Will the U.2 PCIe NVMe 5.0 interface on this Micron 9550 PRO work with my existing PCIe 4.0 backplane?
Yes, the drive is backward compatible with PCIe 4.0 and 3.0 slots, though sequential speeds will be limited to the slower generation's bandwidth.
How can I verify the drive is delivering the rated 14 GB/s read and 10 GB/s write performance after installation?
Run a sequential benchmark such as FIO with a large queue depth; sustained results near 14 GB/s read and 10 GB/s write confirm the PCIe 5.0 link is operating at full speed.
Does the 15.36 TB U.2 SSD ship with a heatsink, mounting screws or power cable, or must I source them separately?
The drive is supplied as a bare U.2 module; any 15 mm heatsink, carrier screws or power cabling required by your server chassis must be purchased separately.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
