Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
A rectangular 2.5 inch silver metal SSD with SATA connectors on one end

Micron

Micron MTFDDAK256TDL-1AW1ZABYY 1300 Series 256GB SATA 2.5" internal SSD

SKU CH-J7P2-BPJ8F MPN MTFDDAK256TDL-1AW1ZABYY

A 2.5 inch SATA internal SSD with 256 GB capacity and sequential read and write speeds of 530 MBps and 520 MBps

  • Fast boot and app load with 530 MB/s sequential read
  • Smooth file saves and installs at 520 MB/s sequential write
  • 256 GB capacity stores OS, programs and everyday files
  • SATA 6 Gb/s interface fits standard 2.5" laptop and desktop bays
  • Micron 3D TLC NAND on the 1300 series delivers reliable endurance

1300 Series 256 GB SATA SSD

The Micron 1300 Series is a 2.5-inch internal solid-state drive with 256 GB capacity. It connects via a SATA 6Gb/s interface and uses 3D triple-level cell NAND flash memory. This drive suits desktops or laptops that require a standard SATA storage upgrade.

Sustained write behaviour

Sequential reads reach 530 MB/s and writes reach 520 MB/s. Under continuous workloads the 3D TLC NAND manages data placement to maintain steady throughput. The drive transfer rate is rated at 600 MBps external, reflecting the SATA link ceiling rather than burst-only peaks.

SATA 6Gb/s interface limit

The SATA 6Gb/s interface caps practical throughput at 600 MBps. Real-world speeds sit at 530 MB/s read and 520 MB/s write, leaving minimal headroom above the link maximum. Systems limited to SATA 3Gb/s will halve the available bandwidth.

Prednosti

  • Fast boot and app load with 530 MB/s sequential read
  • Smooth file saves and installs at 520 MB/s sequential write
  • 256 GB capacity stores OS, programs and everyday files
  • SATA 6 Gb/s interface fits standard 2.5" laptop and desktop bays
  • Micron 3D TLC NAND on the 1300 series delivers reliable endurance

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How much heat and power does the Micron 1300 Series 256GB SATA 2.5" SSD generate when running continuously?

As a solid-state drive with no moving parts, the Micron 1300 Series 256GB SATA 2.5" SSD produces minimal heat and draws low power during all-day operation, staying cool inside a standard 2.5-inch drive bay.

What cables or connectors must I already have to install the Micron MTFDDAK256TDL-1AW1ZABYY in my system?

You need a standard SATA data cable and a SATA power connector from your power supply; the drive uses the common SATA 6Gb/s interface and fits any 2.5-inch drive bay or bracket.

Will the Micron 1300 Series 256GB SATA SSD work alongside an older mechanical hard drive in the same machine?

Yes, the Micron 1300 Series 256GB SATA SSD connects via the same SATA 6Gb/s interface used by older hard drives, so both can run together on a motherboard with multiple SATA ports.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.