NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
MorexLab
60 W kit with 20-pin ATX DC-DC board and AC-DC adapter, includes cables for SATA, Molex and 4-pin CPU power
This kit provides a complete power solution for compatible Morex Mini-ITX cases. It includes a DC-DC board, an AC-DC adapter and all necessary cables. The unit delivers 60 W of power through a 20-pin ATX connector. It is built as a direct replacement for the standard supply found in those enclosures.
The 20-pin to 20+4-pin cable fits both 20-pin and 24-pin motherboard sockets. Output connectors include one SATA, one Molex and one Mini-Molex plus an ATX 12V 4-pin plug. Systems requiring higher wattage or additional peripheral connectors will need a different power source. The kit operates between 0 and 45 °C.
The board measures 156 mm by 30 mm by 19 mm and uses an AT type design without a -5 V rail. A 20-pin to 20+4-pin cable is supplied for motherboard compatibility. All DC input, ATX power and adapter cables are included in the package. This specification determines fit and power delivery for the target case.
| Type | AT |
|---|
The board powers on when the 60W AC-DC adapter is plugged in and the 20-pin ATX cable is seated in the motherboard connector; the system should POST and show stable voltage rails in BIOS.
The kit includes the DC-DC board, 60W AC-DC adapter, DC input cable, ATX power cable with SATA, Molex, Mini-Molex and 12V 4-pin connectors, plus a 20-pin to 20+4-pin adapter; only the Mini-ITX case and motherboard are needed separately.
Use the included 20-pin to 20+4-pin cable — keep the extra 4 pins attached for a 24-pin motherboard socket or remove them for a 20-pin socket; the board itself has a 20-pin ATX connector.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?