Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black ATX mid-tower with 270-degree tempered glass panel, seven pre-installed 120mm ARGB fans, front USB-C and USB 3.2 ports

MSI

MSI MAG PANO 120R PZ ATX Mid-Tower PC Case

SKU CH-V1JF-XY5BN MPN MAG PANO 120R PZ

Mid-tower ATX case with a 270-degree tempered glass panel, seven pre-installed 120mm ARGB fans, support for 360mm radiators and GPUs up to 338mm

  • TypeMicro ATX Mid Tower
  • ColorBlack
  • Case MaterialABS Plastic / SPCC Steel / Tempered Glass
  • With Power SupplyNo
  • Motherboard CompatibilityATX / Micro ATX / Mini-ITX
  • Side Panel1 x Side Tempered Glass Panel
  • Panoramic 270-degree tempered glass turns the build into a showcase
  • Seven pre-installed 120mm ARGB fans deliver balanced airflow out of the box
  • Adjustable GPU bracket with level indicator prevents graphics-card sag
  • Back-connect motherboard support simplifies cable routing during assembly
  • Dust filters on top and bottom make routine cleaning straightforward

Showcase Chassis for ATX Builds

The MSI MAG PANO 120R PZ is an ATX mid-tower case built around a 270-degree tempered glass panel that turns the interior into a display cabinet. It targets builders who want their hardware and figurines visible from almost any angle while still fitting standard ATX, Micro-ATX or Mini-ITX motherboards. Seven pre-installed 120 mm ARGB fans provide immediate airflow and lighting without extra purchases. A bundled VGA bracket with a level indicator keeps long graphics cards from sagging.

Upgrade from Closed or Fan-Less Cases

This case replaces enclosures that lack tempered glass, pre-installed cooling or back-connect motherboard support. The jump is worth it when you need a 360 mm radiator up top, seven expansion slots for full-length cards up to 338 mm, and a CPU cooler clearance of 180 mm without buying fans separately. Builders who only need a basic steel box with no glass or RGB will not benefit from the extra cost and weight.

Straightforward Install With Two Common Snags

Installation is simplified by the back-connect motherboard layout, which lets you route cables before seating the board, and by the fan hub that consolidates PWM and ARGB connections to a single control board. Dust filters on the top and bottom pull out for cleaning. The main issues are the single internal 2.5-inch bay limiting SSD counts and the side glass panel adding bulk in tight workspaces.

Prednosti

  • Panoramic 270-degree tempered glass turns the build into a showcase
  • Seven pre-installed 120mm ARGB fans deliver balanced airflow out of the box
  • Adjustable GPU bracket with level indicator prevents graphics-card sag
  • Back-connect motherboard support simplifies cable routing during assembly
  • Dust filters on top and bottom make routine cleaning straightforward

Špecifikácie

BrandMSI
ModelMAG PANO 120R PZ
TypeMicro ATX Mid Tower
ColorBlack
Case MaterialABS Plastic / SPCC Steel / Tempered Glass
With Power SupplyNo
Motherboard CompatibilityATX / Micro ATX / Mini-ITX
Side Panel1 x Side Tempered Glass Panel
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots7
Front Ports1 x USB 3.2 Type-C, 1 x USB 3.2 Gen 1
Fan OptionsBottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Pre-installed FansBottom - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Max GPU Length338 mm
Max CPU Cooler Height180 mm
Prepravná hmotnosť16.33 kg
Rozmery balenia591 × 578 × 394 mm

Otázky k tomuto produktu

What clearance does the case give for a graphics card and CPU cooler?

The chassis accepts graphics cards up to 338 mm long and CPU coolers up to 180 mm tall.

How are the seven pre-installed ARGB fans connected and what is the common wiring mistake?

All seven 120 mm PWM ARGB fans plug into the included 10-port ARGB and PWM control board; the step often missed is connecting that board to both a motherboard ARGB header and a PWM fan header so lighting and speed control work together.

Which dust filters need regular cleaning and how are they accessed?

Magnetic filters on the top and bottom panels pull out for cleaning; remove them, rinse or vacuum the mesh, then snap them back in place.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.