Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green bare circuit board DDR5 RDIMM 288 pin 128GB

NEMIX RAM

NEMIX RAM 128GB DDR5 5600MHz CL46 4Rx4 1.1V ECC Registered RDIMM memory upgrade

SKU CH-7GKS-7TY4N

A 128 GB DDR5 5600 MHz CL46 4Rx4 1.1 V ECC registered RDIMM validated for the Supermicro X14SDV-36CE-SP3F motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

  • 128 GB capacity lets you fully populate Supermicro X14SDV-36CE-SP3F memory slots
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • DDR5 5600 MHz PC5-44800 speed matches the board's rated memory clock exactly
  • 1 V operation with CL46 timing meets the module's specified voltage and latency
  • 288-pin 4Rx4 RDIMM form factor fits the required slot type without adapters

Server-grade DDR5 RDIMM for Supermicro

This 128GB registered ECC module is built for the Supermicro X14SDV-36CE-SP3F motherboard. It delivers the exact DDR5-5600 speed, 4Rx4 rank structure and 1.1V voltage the platform expects. System administrators upgrading memory in compatible Supermicro servers will find it recognised at full capacity without manual tuning.

288-pin registered form factor with no heat spreader

The module uses a standard 288-pin RDIMM connector that seats directly into the motherboard's DDR5 DIMM slots. Registered buffering reduces electrical load on the memory controller, allowing full population of all supported slots. The absence of a heat spreader keeps the profile low for dense server chassis where airflow is managed by the system fans.

128GB capacity per module at CL46 latency

Each stick provides 128GB of DDR5 memory with a CAS latency of 46 cycles at the rated 5600 MT/s data rate. This single-specification capacity and timing combination determines whether the module matches the server's qualified-vendor list and population rules. Buyers needing a different density or latency profile should verify their hardware documentation before ordering.

Prednosti

  • 128 GB capacity lets you fully populate Supermicro X14SDV-36CE-SP3F memory slots
  • Registered ECC design offloads the controller and corrects single-bit errors on the fly
  • DDR5 5600 MHz PC5-44800 speed matches the board's rated memory clock exactly
  • 1 V operation with CL46 timing meets the module's specified voltage and latency
  • 288-pin 4Rx4 RDIMM form factor fits the required slot type without adapters

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What does the DDR5 5600 PC5-44800 interface cap in practice?

The DDR5 5600 PC5-44800 interface runs at 5600 MT/s with a CL46 latency and 1.1V voltage, which is the rated speed and timing the memory controller expects for full capacity operation.

What physical slot and form factor does this 288-pin RDIMM require?

This module uses a 288-pin DDR5 RDIMM form factor and must be installed in a DDR5 RDIMM slot on the Supermicro X14SDV-36CE-SP3F motherboard; it will not fit UDIMM or SODIMM slots.

How is this registered ECC module installed, and what step is often missed?

Install the 4Rx4 registered ECC RDIMM in the correct population order per the motherboard manual; the step often missed is verifying the approved DIMM sequence before seating the module fully until the retention clips click.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.