NEMIX RAM 128GB 2x64GB DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM for Supermicro X14SDV-36CE-SP3F memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
A 128 GB DDR5 5600 MHz CL46 4Rx4 1.1 V ECC registered RDIMM validated for the Supermicro X14SDV-36CE-SP3F motherboard
This 128GB registered ECC module is built for the Supermicro X14SDV-36CE-SP3F motherboard. It delivers the exact DDR5-5600 speed, 4Rx4 rank structure and 1.1V voltage the platform expects. System administrators upgrading memory in compatible Supermicro servers will find it recognised at full capacity without manual tuning.
The module uses a standard 288-pin RDIMM connector that seats directly into the motherboard's DDR5 DIMM slots. Registered buffering reduces electrical load on the memory controller, allowing full population of all supported slots. The absence of a heat spreader keeps the profile low for dense server chassis where airflow is managed by the system fans.
Each stick provides 128GB of DDR5 memory with a CAS latency of 46 cycles at the rated 5600 MT/s data rate. This single-specification capacity and timing combination determines whether the module matches the server's qualified-vendor list and population rules. Buyers needing a different density or latency profile should verify their hardware documentation before ordering.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The DDR5 5600 PC5-44800 interface runs at 5600 MT/s with a CL46 latency and 1.1V voltage, which is the rated speed and timing the memory controller expects for full capacity operation.
This module uses a 288-pin DDR5 RDIMM form factor and must be installed in a DDR5 RDIMM slot on the Supermicro X14SDV-36CE-SP3F motherboard; it will not fit UDIMM or SODIMM slots.
Install the 4Rx4 registered ECC RDIMM in the correct population order per the motherboard manual; the step often missed is verifying the approved DIMM sequence before seating the module fully until the retention clips click.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?