暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare DDR5 RDIMM module with gold edge connectors and black chips

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 CL46 4Rx4 1.1V ECC RDIMM memory upgrade

SKU CH-HD2S-V0G2G

128GB DDR5-5600 ECC registered RDIMM with CL46 latency, 1.1V operation and 4Rx4 rank for Supermicro X14SDW-36C-SP9F servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

  • 128GB capacity for high-density server workloads
  • DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
  • CL46 latency and 1.1V operation for efficient timing at rated voltage
  • 4Rx4 Registered ECC design corrects single-bit errors and supports full-slot populations
  • 288-pin RDIMM form factor matches Supermicro X14SDW-36C-SP9F motherboard requirements

Exact-match server upgrade

This 128GB DDR5 5600 CL46 ECC RDIMM is built for the Supermicro X14SDW-36C-SP9F motherboard. Its 4Rx4 registered architecture and 1.1V operation match the board's memory controller requirements so the full capacity is recognised at rated speed. It targets administrators who need maximum density in every slot of this specific platform.

Replaces lower-density RDIMMs

The jump is worth it when the workload demands more capacity per channel than smaller registered modules can provide. Population rules on the X14SDW-36C-SP9F limit how many ranks the controller can address so a single 128GB 4Rx4 DIMM delivers the density that multiple lower-rank sticks cannot. It is not for systems that only accept UDIMM or SODIMM form factors.

Slot-in installation with manual checks

The 288-pin RDIMM seats like any registered module but the motherboard manual dictates exact population order and supported capacities per slot. Mis-ordered DIMMs are the usual cause of POST failures or reduced speed. Verify the approved configuration before fitting and ensure the board firmware is current for DDR5 5600 operation.

特長

  • 128GB capacity for high-density server workloads
  • DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
  • CL46 latency and 1.1V operation for efficient timing at rated voltage
  • 4Rx4 Registered ECC design corrects single-bit errors and supports full-slot populations
  • 288-pin RDIMM form factor matches Supermicro X14SDW-36C-SP9F motherboard requirements

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR5 RDIMM fit the Supermicro X14SDW-36C-SP9F motherboard slots?

Yes, the 288-pin RDIMM form factor matches the DDR5 slots on the Supermicro X14SDW-36C-SP9F motherboard. It is not a UDIMM or SODIMM, so it aligns with the board's physical requirements.

What installation step is often missed when populating all slots with these 4Rx4 registered modules?

Follow the motherboard manual's DIMM population order exactly. Registered ECC modules must be installed in the approved sequence so the memory controller recognizes the full 128GB capacity at 5600MHz.

Does the 1.1V DDR5 RDIMM require any ongoing maintenance or component replacement after installation?

No scheduled maintenance is needed. The module has no heat spreader or moving parts. ECC error correction runs automatically. Replace only if diagnostics report uncorrectable errors or the module fails.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。