BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.002786BTC
Skladom
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 SODIMM POSIFLEX EK-2432 memory upgrade
16 GB DDR4 3200 SODIMM with CL22 latency for POSIFLEX EK-2432 kiosk upgrades
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz boosts POSIFLEX EK-2432 kiosk responsiveness
- CL22 latency at 1.20 V keeps power draw low in always-on terminals
- 2Rx8 260-pin SODIMM fits the Mercury Series slot without adapters
- Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
- Non-ECC unbuffered design matches factory spec for drop-in compatibility
POSIFLEX EK-2432 compatible SODIMM
This NEMIX RAM module is a 16GB DDR4 3200 SODIMM built specifically for the POSIFLEX EK-2432 Mercury Series kiosk. It delivers a direct memory upgrade for point-of-sale systems needing extra capacity. The 260-pin form factor matches the slot layout of the target platform.
Single-module package with no extras
The package contains only the 16GB SODIMM itself; no heat spreader, cables, software or additional brackets are included. Installation relies on the kiosk's existing SO-DIMM slot and standard DDR4 voltage of 1.2V. The unbuffered, non-ECC design keeps the upgrade path simple for IT staff.
2Rx8 dual-rank organisation
The memory uses a 2Rx8 configuration with CL22 latency at 3200 MT/s. Dual-rank modules can affect maximum supported capacity per channel on some kiosk motherboards. Buyers who need a single-rank 1Rx8 or 1Rx16 module for compatibility reasons should verify the platform's rank limits first.
Prednosti
- 16 GB DDR4 3200 MHz boosts POSIFLEX EK-2432 kiosk responsiveness
- CL22 latency at 1.20 V keeps power draw low in always-on terminals
- 2Rx8 260-pin SODIMM fits the Mercury Series slot without adapters
- Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
- Non-ECC unbuffered design matches factory spec for drop-in compatibility
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Will the 16GB 2Rx8 SODIMM need any firmware updates or re-seating after extended use in the POSIFLEX EK-2432?
No firmware is required for this DDR4 module. The 260-pin SODIMM uses standard JEDEC timings at 3200 MT/s and 1.20 V. If the kiosk is moved or vibrated, re-seating the module once a year is good practice.
What limit appears first when the POSIFLEX EK-2432 runs the 16GB DDR4 3200 CL22 module continuously at full load?
The CAS latency of CL22 at 3200 MT/s sets the access-time ceiling. With a single 16GB 2Rx8 rank, memory bandwidth saturates before thermal or voltage limits are reached.
How much heat and power does the 1.20 V 16GB DDR4 SODIMM add when the kiosk operates 24/7?
At 1.20 V the module draws only a few watts and has no heat spreader. In a POSIFLEX EK-2432 chassis it adds negligible heat and no audible noise during all-day operation.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
