We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 SODIMM POSIFLEX EK-2432 memory upgrade

SKU CH-H86V-GE96J

16 GB DDR4 3200 SODIMM with CL22 latency for POSIFLEX EK-2432 kiosk upgrades

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts POSIFLEX EK-2432 kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low in always-on terminals
  • 2Rx8 260-pin SODIMM fits the Mercury Series slot without adapters
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
  • Non-ECC unbuffered design matches factory spec for drop-in compatibility

POSIFLEX EK-2432 compatible SODIMM

This NEMIX RAM module is a 16GB DDR4 3200 SODIMM built specifically for the POSIFLEX EK-2432 Mercury Series kiosk. It delivers a direct memory upgrade for point-of-sale systems needing extra capacity. The 260-pin form factor matches the slot layout of the target platform.

Single-module package with no extras

The package contains only the 16GB SODIMM itself; no heat spreader, cables, software or additional brackets are included. Installation relies on the kiosk's existing SO-DIMM slot and standard DDR4 voltage of 1.2V. The unbuffered, non-ECC design keeps the upgrade path simple for IT staff.

2Rx8 dual-rank organisation

The memory uses a 2Rx8 configuration with CL22 latency at 3200 MT/s. Dual-rank modules can affect maximum supported capacity per channel on some kiosk motherboards. Buyers who need a single-rank 1Rx8 or 1Rx16 module for compatibility reasons should verify the platform's rank limits first.

Highlights

  • 16 GB DDR4 3200 MHz boosts POSIFLEX EK-2432 kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low in always-on terminals
  • 2Rx8 260-pin SODIMM fits the Mercury Series slot without adapters
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
  • Non-ECC unbuffered design matches factory spec for drop-in compatibility

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will the 16GB 2Rx8 SODIMM need any firmware updates or re-seating after extended use in the POSIFLEX EK-2432?

No firmware is required for this DDR4 module. The 260-pin SODIMM uses standard JEDEC timings at 3200 MT/s and 1.20 V. If the kiosk is moved or vibrated, re-seating the module once a year is good practice.

What limit appears first when the POSIFLEX EK-2432 runs the 16GB DDR4 3200 CL22 module continuously at full load?

The CAS latency of CL22 at 3200 MT/s sets the access-time ceiling. With a single 16GB 2Rx8 rank, memory bandwidth saturates before thermal or voltage limits are reached.

How much heat and power does the 1.20 V 16GB DDR4 SODIMM add when the kiosk operates 24/7?

At 1.20 V the module draws only a few watts and has no heat spreader. In a POSIFLEX EK-2432 chassis it adds negligible heat and no audible noise during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.