Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-ZB87-KKS17

256 GB DDR5 server kit with two 128 GB registered ECC modules at 5600 MHz, CL46, 1.1 V, validated for the Supermicro H13SRH motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Zobraziť ďalších 18 konfigurácií

Speed 5600MHz

  • 256 GB capacity from two 128 GB modules enables full server population
  • DDR5 5600 speed with CL46 timing delivers rated bandwidth at 1.1 V
  • Registered ECC RDIMM design corrects single-bit errors and stabilises fully loaded slots
  • 288-pin form factor matches the Supermicro H13SRH motherboard memory slots exactly
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade component reliability

Server-ready DDR5 ECC kit

This 256 GB kit delivers two 128 GB DDR5 5600 RDIMM modules built for the Supermicro H13SRH motherboard. Registered ECC architecture lets the board run every slot at full capacity while correcting single-bit errors before they affect production workloads.

Thermals and power

Operating at 1.1 V the modules draw minimal power and run without heat spreaders, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so fully populated configurations stay stable under sustained load.

Exact specification match

The kit matches the board's required 288-pin RDIMM form factor, 2Rx4 rank structure, CL46 timing and 1.1 V voltage so the memory controller recognises the full 256 GB at rated speed. Buyers needing a different capacity, rank layout or UDIMM form factor should look elsewhere.

Prednosti

  • 256 GB capacity from two 128 GB modules enables full server population
  • DDR5 5600 speed with CL46 timing delivers rated bandwidth at 1.1 V
  • Registered ECC RDIMM design corrects single-bit errors and stabilises fully loaded slots
  • 288-pin form factor matches the Supermicro H13SRH motherboard memory slots exactly
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade component reliability

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the 288-pin DDR5 RDIMM modules on the Supermicro H13SRH and what population order should I follow?

Power down the server, open the chassis, and seat each 128 GB module in the slots specified by the Supermicro H13SRH manual; the board requires registered DIMMs in a defined population sequence so the memory controller recognises the full 256 GB at DDR5-5600.

What maintenance or replacement will the DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; ECC corrects single-bit errors on the fly, and the lifetime replacement warranty covers any module that fails.

What is the first limit that appears under sustained load with these CL46 1.1 V registered DIMMs?

The registered buffer and ECC logic add latency at CL46, so the memory controller’s command queue typically saturates before thermal or voltage limits are reached during continuous heavy workloads.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.