Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 5600 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-V9BT-9RZWY

A 384 GB kit of four 96 GB DDR5 5600 ECC registered DIMMs built for the Supermicro H13SRH motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Zobraziť ďalších 18 konfigurácií

Speed 5600MHz

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matching the H13SRH memory controller
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank keeps power draw within spec
  • 288-pin form factor verified for Supermicro H13SRH motherboard compatibility

Exact-match DDR5 RDIMM kit for Supermicro H13SRH

This NEMIX RAM kit delivers 384GB across four 96GB DDR5 5600 registered ECC modules. The 2Rx4 organisation, 1.1V operating voltage and CL46 timing match the memory controller requirements of the Supermicro H13SRH motherboard so the full capacity is recognised at rated speed.

Thermals noise and power draw

Registered buffering reduces electrical load on the memory controller when all slots are populated, while the 1.1V DDR5 baseline keeps power draw low. No heat spreader is fitted, so airflow across the bare PCBs handles cooling in standard server chassis. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Upgrade scope and fitment check

The kit replaces any lower-capacity RDIMM set or fills empty slots to reach the board's maximum supported density. The jump is worth it when workloads need the full 384GB at DDR5 5600 without downclocking. Consult the motherboard manual for approved population order and supported capacities before installation.

Prednosti

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matching the H13SRH memory controller
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank keeps power draw within spec
  • 288-pin form factor verified for Supermicro H13SRH motherboard compatibility

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the 288-pin RDIMM modules in the Supermicro H13SRH, and which step is commonly missed?

Power down the server, open the chassis, and insert each 96GB module into the slots specified by the motherboard manual's population order, pressing until both latches click; the step often missed is confirming the exact slot sequence for four 2Rx4 RDIMMs before booting.

What maintenance or replacement will the 384GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors automatically, so replacement only occurs if a module fails and is covered by the lifetime replacement warranty.

What is the first limit that appears when the 4x96GB kit runs at DDR5 5600 continuously under full load?

The registered buffer and 1.10V operation keep signal integrity stable at the rated CL46 timing, so the first practical limit is the motherboard's maximum supported capacity and population rules rather than the memory modules themselves.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.