Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR5 RDIMM sticks with black chips in a row

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 5600MHz ECC RDIMM Server Memory Kit for Supermicro H13SSW

SKU CH-0HH5-764XP

256 GB kit of eight 32 GB DDR5 5600 MHz ECC registered DIMMs validated for Supermicro H13SSW servers

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Zobraziť ďalších 24 konfigurácií
  • 256GB total capacity from eight 32GB modules enables large-scale workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSW
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx8 rank matches the motherboard's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target server board

Exact-match upgrade for Supermicro H13SSW

This 256GB kit contains eight 32GB DDR5 5600MHz RDIMMs built to the board's required 2Rx8 registered ECC specification. Each module runs at 1.1V with CL46 timing so the memory controller recognises the full capacity at rated speed without manual tuning.

Sustained-load behaviour

Registered buffering reduces electrical load on the controller allowing all eight slots to stay populated at 5600MHz during continuous workloads. ECC corrects single-bit errors on the fly preventing silent data corruption that would otherwise force unplanned reboots in production environments.

DDR5 RDIMM practical limits

The 288-pin RDIMM form factor fits only motherboards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots. Population order and maximum supported capacity are defined by the H13SSW manual so verify the approved configuration before installation.

Prednosti

  • 256GB total capacity from eight 32GB modules enables large-scale workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSW
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1V operation at 2Rx8 rank matches the motherboard's exact voltage and timing requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target server board

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 1.1V registered DDR5 kit generate noticeably more heat when all eight slots are populated continuously?

The modules run at the standard DDR5 voltage of 1.10V with a registered buffer that reduces electrical load on the memory controller, so thermal output stays within normal server DIMM limits even with the full 256GB kit installed.

What must the motherboard provide for this 288-pin RDIMM kit to function?

The board needs eight DDR5 RDIMM slots wired for registered ECC memory, a memory controller that accepts 2Rx8 organization at 5600MT/s, and a BIOS that supports the 1.1V operating voltage and CL46 timing.

Will the CL46 5600MHz registered ECC modules run correctly beside any older DDR5 DIMMs I keep in the same chassis?

Mixing DIMMs with different speeds, ranks, or timings forces the memory controller to downclock all modules to the lowest common settings, so the kit will only run at its rated 5600MHz CL46 when all eight slots use identical modules.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.