BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278445BTC
Skladom
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2133 CL15 SODIMM POSIFLEX RT-5116 memory upgrade
Dual 16 GB DDR4 2133 CL15 SODIMM kit upgrades POSIFLEX RT-5116 terminals to 32 GB at 1.2 V
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB total capacity from two 16 GB modules
- DDR4 2133 speed with CL15 latency for responsive operation
- 2 V low-voltage design reduces power draw
- 260-pin SODIMM form factor fits POSIFLEX RT-5116 terminals
- Built with major OEM chips and stress-tested for reliability
POSIFLEX RT-5116 memory kit
This 32GB kit contains two 16GB DDR4 2133 SODIMM modules built for the POSIFLEX RT-5116 terminal. Each stick runs at 1.2V with CL15 latency and uses a 260-pin unbuffered non-ECC layout. The memory is validated for the specific point-of-sale platform and ships ready to install.
Suits POSIFLEX RT-5116 upgrades only
Technicians servicing the RT-5116 terminal can use this kit to reach the system's 32GB capacity. Builders working on other POS hardware, laptops, or desktop motherboards should look elsewhere because the modules are qualified for this single platform. Buyers who need ECC error correction or registered DIMMs cannot use this product.
260-pin DDR4 SODIMM form factor
The decisive specification is the 260-pin DDR4 SODIMM interface, which physically and electrically matches the RT-5116 memory slots. A module with a different pin count, voltage, or DDR generation will not fit or function in this terminal. Confirm the slot type before ordering.
Prednosti
- 32 GB total capacity from two 16 GB modules
- DDR4 2133 speed with CL15 latency for responsive operation
- 2 V low-voltage design reduces power draw
- 260-pin SODIMM form factor fits POSIFLEX RT-5116 terminals
- Built with major OEM chips and stress-tested for reliability
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
Should I choose the 32GB kit or a smaller capacity for the POSIFLEX RT-5116?
The kit provides 32GB total using two 16GB modules. The POSIFLEX RT-5116 must accept two SODIMM slots for this configuration to work.
What does the 2133MHz rating mean once installed in the RT-5116?
The modules run at DDR4 2133 (PC4-17000) with CL15 latency at 1.20V. Actual speed follows the terminal's memory controller specification.
Does the 260-pin SODIMM interface limit bandwidth on this terminal?
The 260-pin DDR4 SODIMM form factor carries the PC4-17000 data rate. Bandwidth is capped by the RT-5116's chipset and memory controller.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
