Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green 260-pin DDR4 SODIMM sticks in static bags

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2133 CL15 SODIMM POSIFLEX RT-5116 memory upgrade

SKU CH-ZYVE-HJ516

Dual 16 GB DDR4 2133 CL15 SODIMM kit upgrades POSIFLEX RT-5116 terminals to 32 GB at 1.2 V

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity from two 16 GB modules
  • DDR4 2133 speed with CL15 latency for responsive operation
  • 2 V low-voltage design reduces power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-5116 terminals
  • Built with major OEM chips and stress-tested for reliability

POSIFLEX RT-5116 memory kit

This 32GB kit contains two 16GB DDR4 2133 SODIMM modules built for the POSIFLEX RT-5116 terminal. Each stick runs at 1.2V with CL15 latency and uses a 260-pin unbuffered non-ECC layout. The memory is validated for the specific point-of-sale platform and ships ready to install.

Suits POSIFLEX RT-5116 upgrades only

Technicians servicing the RT-5116 terminal can use this kit to reach the system's 32GB capacity. Builders working on other POS hardware, laptops, or desktop motherboards should look elsewhere because the modules are qualified for this single platform. Buyers who need ECC error correction or registered DIMMs cannot use this product.

260-pin DDR4 SODIMM form factor

The decisive specification is the 260-pin DDR4 SODIMM interface, which physically and electrically matches the RT-5116 memory slots. A module with a different pin count, voltage, or DDR generation will not fit or function in this terminal. Confirm the slot type before ordering.

Points forts

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2133 speed with CL15 latency for responsive operation
  • 2 V low-voltage design reduces power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-5116 terminals
  • Built with major OEM chips and stress-tested for reliability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions sur cet article

Should I choose the 32GB kit or a smaller capacity for the POSIFLEX RT-5116?

The kit provides 32GB total using two 16GB modules. The POSIFLEX RT-5116 must accept two SODIMM slots for this configuration to work.

What does the 2133MHz rating mean once installed in the RT-5116?

The modules run at DDR4 2133 (PC4-17000) with CL15 latency at 1.20V. Actual speed follows the terminal's memory controller specification.

Does the 260-pin SODIMM interface limit bandwidth on this terminal?

The 260-pin DDR4 SODIMM form factor carries the PC4-17000 data rate. Bandwidth is capped by the RT-5116's chipset and memory controller.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.