BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277873BTC
Skladom
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX RT-2016 memory upgrade
4GB DDR3 1333 SODIMM built for POSIFLEX RT-2016 terminals, 1.35 V, 204-pin, CL9, tested for stability
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches POSIFLEX RT-2016 memory bus
- 35V low-voltage operation reduces system power draw
- 204-pin SODIMM form factor fits terminal memory slot
- 2Rx8 dual-rank organisation improves memory bandwidth
POSIFLEX RT-2016 memory upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX RT-2016 terminal. It runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin module uses a 2Rx8 unbuffered non-ECC layout with major-brand DRAM chips.
IT managers maintaining existing RT-2016 fleets
Technicians who need a direct-replacement stick for warranty-safe repairs will find the correct pin-out and voltage here. Buyers who want ECC error correction, registered buffering, higher frequencies, or capacities above 4 GB per slot should look at something else.
1.35 V low-voltage DDR3 specification
The module is rated for 1.35 V while the chipset supports 1.50 V, so it will run at the lower voltage without configuration changes. Confirm the terminal accepts 1.35 V DDR3 SODIMMs before ordering.
Prednosti
- 4GB capacity expands POS terminal multitasking headroom
- DDR3 1333 speed matches POSIFLEX RT-2016 memory bus
- 35V low-voltage operation reduces system power draw
- 204-pin SODIMM form factor fits terminal memory slot
- 2Rx8 dual-rank organisation improves memory bandwidth
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Will the 204-pin DDR3 SODIMM need any periodic cleaning or replacement?
The module has no moving parts and no heat spreader, so no scheduled cleaning or replacement is required under normal operation.
What limit appears first when the POS terminal runs the 1333 MHz memory continuously?
The system's memory controller and thermal design set the practical ceiling; the module itself is rated for continuous operation at CL9 latency.
How much heat or power does the 1.35 V 4 GB stick add during all-day use?
Operating at 1.35 V, the unbuffered SODIMM draws minimal power and generates little heat, well within the POSIFLEX RT-2016 chassis limits.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
