We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX RT-2016 memory upgrade

SKU CH-TFEG-92HD3

4GB DDR3 1333 SODIMM built for POSIFLEX RT-2016 terminals, 1.35 V, 204-pin, CL9, tested for stability

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX RT-2016 memory bus
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal memory slot
  • 2Rx8 dual-rank organisation improves memory bandwidth

POSIFLEX RT-2016 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX RT-2016 terminal. It runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin module uses a 2Rx8 unbuffered non-ECC layout with major-brand DRAM chips.

IT managers maintaining existing RT-2016 fleets

Technicians who need a direct-replacement stick for warranty-safe repairs will find the correct pin-out and voltage here. Buyers who want ECC error correction, registered buffering, higher frequencies, or capacities above 4 GB per slot should look at something else.

1.35 V low-voltage DDR3 specification

The module is rated for 1.35 V while the chipset supports 1.50 V, so it will run at the lower voltage without configuration changes. Confirm the terminal accepts 1.35 V DDR3 SODIMMs before ordering.

Highlights

  • 4GB capacity expands POS terminal multitasking headroom
  • DDR3 1333 speed matches POSIFLEX RT-2016 memory bus
  • 35V low-voltage operation reduces system power draw
  • 204-pin SODIMM form factor fits terminal memory slot
  • 2Rx8 dual-rank organisation improves memory bandwidth

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will the 204-pin DDR3 SODIMM need any periodic cleaning or replacement?

The module has no moving parts and no heat spreader, so no scheduled cleaning or replacement is required under normal operation.

What limit appears first when the POS terminal runs the 1333 MHz memory continuously?

The system's memory controller and thermal design set the practical ceiling; the module itself is rated for continuous operation at CL9 latency.

How much heat or power does the 1.35 V 4 GB stick add during all-day use?

Operating at 1.35 V, the unbuffered SODIMM draws minimal power and generates little heat, well within the POSIFLEX RT-2016 chassis limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.