BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277188BTC
Skladom
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR4-2933 CL21 2Rx8 ECC RDIMM 288-pin Dell Precision 5820
A 64 GB kit of four 16 GB DDR4-2933 ECC registered DIMMs built for the Dell Precision 5820 workstation
- Capacity64GB (4 x 16GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB total capacity from four 16 GB modules
- ECC registered design protects data integrity under load
- DDR4-2933 speed rated at PC4-23400 bandwidth
- Low 1.20 V operation reduces power draw
- Validated for Dell Precision 5820 tower workstations
Dell Precision 5820 ECC RDIMM kit
This 64 GB kit contains four 16 GB DDR4-2933 registered DIMMs built for the Dell Precision 5820 tower workstation. ECC and registered buffering protect data integrity in professional workloads. The modules run at 1.2 V with CL21 latency and use major OEM DRAM from Samsung, Micron or Hynix. No heat spreaders are fitted.
Thermals noise and power at 1.2 V
Operating at the standard DDR4 voltage of 1.2 V keeps power draw low and reduces heat output in the Precision 5820 chassis. Registered buffering adds minimal electrical load while the absence of spreaders allows direct airflow over the DRAM. The workstation’s stock cooling handles the thermal load without extra fan speed or audible noise increase.
Package contents and compatibility assurance
The box delivers four matched 288-pin RDIMMs totalling 64 GB, labelled with part number MR23400-628K4 for easy verification. Each module is stress-tested under load before shipping to confirm stability in the target system. The kit is designed exclusively for the Dell Precision 5820 and is not suited for consumer motherboards or non-ECC platforms.
Prednosti
- 64 GB total capacity from four 16 GB modules
- ECC registered design protects data integrity under load
- DDR4-2933 speed rated at PC4-23400 bandwidth
- Low 1.20 V operation reduces power draw
- Validated for Dell Precision 5820 tower workstations
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-628K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT |
Otázky k tomuto produktu
How do I install the 288-pin DDR4 RDIMM modules in the Dell Precision 5820, and which slot order should I follow?
Power down the workstation, open the chassis, and insert each 16 GB module into the DIMM slots following the sequence shown in the Dell Precision 5820 service manual — typically populating channels in order 1, 2, 3, 4 for quad-channel operation.
What maintenance or replacement will the ECC registered memory need over its service life?
The modules have no moving parts or heat spreaders; apart from occasional dust removal with compressed air, no scheduled maintenance is required, and a lifetime replacement warranty covers any module that fails.
What thermal or voltage limit appears first when the 1.2 V DDR4-2933 kit runs sustained workloads?
The JEDEC-specified 1.20 V operating voltage is the primary electrical limit; exceeding it risks instability, while the registered buffer and ECC logic keep signal integrity within spec under continuous load.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
