BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277984BTC
Skladom
NEMIX RAM
NEMIX RAM 8GB DDR3 1333 2Rx8 1.35V 204-PIN SODIMM POSIFLEX PS-3516 memory upgrade
8GB DDR3 SODIMM running at 1333MHz with CL9 latency for POSIFLEX PS-3516 terminals
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3516 terminals
- DDR3 1333 MHz CL9 for responsive operation
- 8 GB single module expands capacity
- Low-voltage 1.35 V reduces power draw
- Built with Samsung, Micron or Hynix chips
POSIFLEX PS-3516 memory upgrade
This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3516 fanless point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency in a single 204-pin module that fits the system’s SO-DIMM slot. The non-ECC unbuffered design matches the original specification for reliable operation in retail and kiosk environments.
Retail operators needing a direct replacement
This module suits technicians upgrading or repairing a PS-3516 terminal that requires DDR3 1333 memory at 1.35 V. It is not for builders working on consumer laptops or desktops that need standard 1.50 V DDR3 or a different pin count. Buyers who want ECC error correction or registered buffering must choose a different part.
1.35 V low-voltage DDR3 specification
The memory runs at 1.35 V, which is the decisive electrical requirement for the PS-3516 platform. A standard 1.50 V DDR3 SODIMM will not meet the terminal’s power envelope and can cause instability. Confirm the 1.35 V rating before ordering to ensure compatibility.
Prednosti
- Designed for POSIFLEX PS-3516 terminals
- DDR3 1333 MHz CL9 for responsive operation
- 8 GB single module expands capacity
- Low-voltage 1.35 V reduces power draw
- Built with Samsung, Micron or Hynix chips
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
How do I install this 204-pin SODIMM in the POSIFLEX PS-3516, and which step is often missed?
Power off the terminal, remove the access panel, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click into place; the step most people miss is verifying both clips have fully latched.
What maintenance or replacement will this 8GB DDR3 module need over time?
No scheduled maintenance is required; if the terminal later shows memory errors or fails to POST, replace the module with an identical 2Rx8 1.35V DDR3 SODIMM.
What limit appears first when this CL9 memory runs sustained workloads in the fanless POSIFLEX PS-3516?
The thermal limit of the fanless chassis is reached first, causing the memory to throttle or the system to shut down before the module hits its own electrical limits.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
