نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 2Rx8 1.35V 204-PIN SODIMM POSIFLEX PS-3516 memory upgrade

SKU CH-RJE4-FN0BP

8GB DDR3 SODIMM running at 1333MHz with CL9 latency for POSIFLEX PS-3516 terminals

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3516 terminals
  • DDR3 1333 MHz CL9 for responsive operation
  • 8 GB single module expands capacity
  • Low-voltage 1.35 V reduces power draw
  • Built with Samsung, Micron or Hynix chips

POSIFLEX PS-3516 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3516 fanless point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency in a single 204-pin module that fits the system’s SO-DIMM slot. The non-ECC unbuffered design matches the original specification for reliable operation in retail and kiosk environments.

Retail operators needing a direct replacement

This module suits technicians upgrading or repairing a PS-3516 terminal that requires DDR3 1333 memory at 1.35 V. It is not for builders working on consumer laptops or desktops that need standard 1.50 V DDR3 or a different pin count. Buyers who want ECC error correction or registered buffering must choose a different part.

1.35 V low-voltage DDR3 specification

The memory runs at 1.35 V, which is the decisive electrical requirement for the PS-3516 platform. A standard 1.50 V DDR3 SODIMM will not meet the terminal’s power envelope and can cause instability. Confirm the 1.35 V rating before ordering to ensure compatibility.

أبرز المميزات

  • Designed for POSIFLEX PS-3516 terminals
  • DDR3 1333 MHz CL9 for responsive operation
  • 8 GB single module expands capacity
  • Low-voltage 1.35 V reduces power draw
  • Built with Samsung, Micron or Hynix chips

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

How do I install this 204-pin SODIMM in the POSIFLEX PS-3516, and which step is often missed?

Power off the terminal, remove the access panel, align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click into place; the step most people miss is verifying both clips have fully latched.

What maintenance or replacement will this 8GB DDR3 module need over time?

No scheduled maintenance is required; if the terminal later shows memory errors or fails to POST, replace the module with an identical 2Rx8 1.35V DDR3 SODIMM.

What limit appears first when this CL9 memory runs sustained workloads in the fanless POSIFLEX PS-3516?

The thermal limit of the fanless chassis is reached first, causing the memory to throttle or the system to shut down before the module hits its own electrical limits.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.