Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green bare circuit board DDR5 RDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM Supermicro H13SST-G memory upgrade

SKU CH-HS7J-KWMAE

96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM validated for the Supermicro H13SST-G motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Zobraziť ďalších 24 konfigurácií
  • Exact DDR5-5600 CL46 2Rx4 spec ensures full-speed operation on Supermicro H13SST-G
  • Registered ECC RDIMM architecture prevents silent data corruption under heavy server loads
  • 96 GB single-module capacity maximises memory density per DIMM slot
  • 10 V DDR5 voltage reduces power draw while maintaining 5600 MT/s throughput
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability and signal integrity

Exact-match DDR5-5600 server upgrade

This 96GB DDR5 5600 (PC5-44800) Registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SST-G motherboard expects. The 2Rx4 organisation and 1.1V operation let the memory controller recognise full capacity at rated speed without manual tuning. It is not suited for systems that require unbuffered UDIMMs or SODIMM form factors.

Thermals, noise and power draw

Operating at 1.1V, the modules draw minimal power and produce little heat in normal server workloads. With no heat spreader fitted, airflow across the bare PCB is sufficient for typical rack densities. Registered buffering reduces electrical load on the memory controller, contributing to stable operation across all populated slots.

What the kit changes

The single 96GB RDIMM adds maximum capacity in one slot, leaving remaining DIMM sockets free for future expansion under the board's population rules. On-board ECC corrects single-bit errors automatically, preventing silent data corruption and unplanned reboots in production environments. Lifetime replacement coverage and US-based technical support back the installation.

Prednosti

  • Exact DDR5-5600 CL46 2Rx4 spec ensures full-speed operation on Supermicro H13SST-G
  • Registered ECC RDIMM architecture prevents silent data corruption under heavy server loads
  • 96 GB single-module capacity maximises memory density per DIMM slot
  • 10 V DDR5 voltage reduces power draw while maintaining 5600 MT/s throughput
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability and signal integrity

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the 288-pin DDR5 RDIMM in the Supermicro H13SST-G, and what step is commonly missed?

Power down the server, open the chassis, and insert the module into the DIMM slot following the motherboard manual's population order; the step most often missed is confirming the correct slot sequence for 2Rx4 registered DIMMs so the controller detects the full 96 GB at 5600 MT/s.

What maintenance or replacement will this 96 GB DDR5 5600 CL46 kit need over its service life?

No scheduled maintenance is required; the module has no heat spreader and operates at 1.1 V, so only replace it if a DIMM fails ECC correction or the server's memory configuration changes.

What limit appears first when the RDIMM runs sustained workloads at 5600 MT/s?

The registered buffer and ECC logic keep signal integrity at the rated 5600 MT/s CL46 timing, so the first practical limit is the motherboard's maximum supported capacity per slot rather than the module's own speed rating.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.