Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board SODIMM module with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 SODIMM memory upgrade

SKU CH-GBFB-M02JW MPN CSE-E101-04

8 GB DDR5 SODIMM at 4800 MT/s, CL40, 1.1 V, validated for SuperMicro IoT SuperServer SYS-E100-13AD-L

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports quick data access cycles
  • 10 V operation reduces power draw and heat
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-L

NEMIX RAM 8GB DDR5 SODIMM for SuperMicro

This NEMIX RAM module is an 8 GB DDR5 SODIMM built for SuperMicro IoT SuperServer platforms. It operates at 4800 MT/s with a CAS latency of CL40 and runs at the standard DDR5 voltage of 1.10 V. The 262-pin unbuffered, non-ECC design fits single-rank 1Rx8 layouts using major OEM chips from Samsung, Micron or Hynix.

Suited for SuperMicro E100/E101 upgrades

The part targets administrators upgrading SuperMicro SYS-E100-13AD-L, X13SAN-L-WOHS or X13SAN-L systems with qualified memory. Builders working on other vendor platforms, or those requiring ECC protection, registered buffering or larger single-module capacities, should look at alternative products.

DDR5 4800 CL40 1.10 V SODIMM specification

The decisive parameter is the DDR5 4800 CL40 1.10 V SODIMM interface, which must match the motherboard slot and memory controller exactly. If the target system calls for a different speed grade, voltage or pin count, this module will not be compatible.

Prednosti

  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports quick data access cycles
  • 10 V operation reduces power draw and heat
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-L

Špecifikácie

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

Does the CL40 latency limit throughput during sustained workloads?

The CL40 timing is the module's rated latency at 4800 MT/s; sustained throughput will follow that specification.

How much heat does the 1.10V module produce when running continuously?

Operating at 1.10V without a heat spreader keeps thermal output low for a DDR5 SODIMM under constant load.

Which Supermicro systems accept this 262-pin DDR5 SODIMM?

It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-L and motherboards X13SAN-L-WOHS and X13SAN-L.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.