Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board SODIMM module with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM CSE-E101-04 8GB DDR5 4800 CL40 SODIMM memory upgrade

SKU CH-GBFB-M02JW MPN CSE-E101-04

8 GB DDR5 SODIMM at 4800 MT/s, CL40, 1.1 V, validated for SuperMicro IoT SuperServer SYS-E100-13AD-L

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports quick data access cycles
  • 10 V operation reduces power draw and heat
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-L

NEMIX RAM 8GB DDR5 SODIMM for SuperMicro

This NEMIX RAM module is an 8 GB DDR5 SODIMM built for SuperMicro IoT SuperServer platforms. It operates at 4800 MT/s with a CAS latency of CL40 and runs at the standard DDR5 voltage of 1.10 V. The 262-pin unbuffered, non-ECC design fits single-rank 1Rx8 layouts using major OEM chips from Samsung, Micron or Hynix.

Suited for SuperMicro E100/E101 upgrades

The part targets administrators upgrading SuperMicro SYS-E100-13AD-L, X13SAN-L-WOHS or X13SAN-L systems with qualified memory. Builders working on other vendor platforms, or those requiring ECC protection, registered buffering or larger single-module capacities, should look at alternative products.

DDR5 4800 CL40 1.10 V SODIMM specification

The decisive parameter is the DDR5 4800 CL40 1.10 V SODIMM interface, which must match the motherboard slot and memory controller exactly. If the target system calls for a different speed grade, voltage or pin count, this module will not be compatible.

Pluspunten

  • 8 GB capacity adds responsive multitasking headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports quick data access cycles
  • 10 V operation reduces power draw and heat
  • 262-pin SODIMM fits Supermicro IoT SuperServer SYS-E100-13AD-L

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

Does the CL40 latency limit throughput during sustained workloads?

The CL40 timing is the module's rated latency at 4800 MT/s; sustained throughput will follow that specification.

How much heat does the 1.10V module produce when running continuously?

Operating at 1.10V without a heat spreader keeps thermal output low for a DDR5 SODIMM under constant load.

Which Supermicro systems accept this 262-pin DDR5 SODIMM?

It is validated for the SuperMicro IoT SuperServer SYS-E100-13AD-L and motherboards X13SAN-L-WOHS and X13SAN-L.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.