Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-4800 96GB (6x16GB) ECC Registered RDIMM CL40 1.1V 1Rx8 for Supermicro H13SST-G memory upgrade

SKU CH-WE6Z-GCSQD

96GB DDR5-4800 ECC Registered RDIMM kit (6x16GB, CL40, 1.1V, 1Rx8) validated for Supermicro H13SST-G motherboards

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Zobraziť ďalších 24 konfigurácií
  • 96 GB capacity in a six-module kit lets you fully populate the Supermicro H13SST-G
  • DDR5-4800 speed with CL40 latency delivers the rated throughput your server expects
  • Registered ECC design corrects single-bit errors and stabilises every slot at full load
  • 1 V operation matches the board's voltage requirement for reliable POST
  • 288-pin RDIMM form factor fits the exact memory slots on the H13SST-G

Exact-match DDR5-4800 kit for Supermicro H13SST-G

This 96GB kit contains six 16GB DDR5-4800 Registered ECC RDIMMs built to the 1Rx8 rank, 1.1V voltage and CL40 timing that the Supermicro H13SST-G memory controller expects. It is designed for servers and workstations that require the full 96GB capacity across all populated slots.

DDR5 RDIMM population limits

Registered DDR5 architecture allows every 288-pin slot to run fully populated at the rated 4800 MT/s speed without down-clocking, while the buffer offloads the memory controller. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads.

1Rx8 rank and CL40 timing decide fit

The 1Rx8 organization and CL40 latency are the single specification the board's firmware validates during POST; a different rank or timing will not be recognised at full capacity or speed. Verify the manual for approved DIMM population order before installation.

Prednosti

  • 96 GB capacity in a six-module kit lets you fully populate the Supermicro H13SST-G
  • DDR5-4800 speed with CL40 latency delivers the rated throughput your server expects
  • Registered ECC design corrects single-bit errors and stabilises every slot at full load
  • 1 V operation matches the board's voltage requirement for reliable POST
  • 288-pin RDIMM form factor fits the exact memory slots on the H13SST-G

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I choose the 96GB 6x16GB kit or a different capacity for my Supermicro H13SST-G?

The 96GB kit uses six 16GB RDIMMs, filling six slots at DDR5-4800 CL40 1.10V 1Rx8 registered ECC. Check your motherboard manual for supported capacities and the approved DIMM population order before deciding.

What does DDR5-4800 mean for real-world throughput in this server?

DDR5-4800 (PC5-38400) sets the maximum data rate at 4800 MT/s per module. With six registered ECC DIMMs installed, the memory controller runs all slots at that rated speed, delivering the bandwidth the platform expects for production workloads.

How does the 288-pin RDIMM interface limit what I can install?

The kit uses 288-pin DDR5 RDIMMs with registered (buffered) architecture and ECC. Your board requires this exact form factor — UDIMMs or SODIMMs will not fit or function. The registered design also allows full-capacity operation across all populated slots.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.