We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-4800 96GB (6x16GB) ECC Registered RDIMM CL40 1.1V 1Rx8 for Supermicro H13SST-G memory upgrade

SKU CH-WE6Z-GCSQD

96GB DDR5-4800 ECC Registered RDIMM kit (6x16GB, CL40, 1.1V, 1Rx8) validated for Supermicro H13SST-G motherboards

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Show 24 more configurations
  • 96 GB capacity in a six-module kit lets you fully populate the Supermicro H13SST-G
  • DDR5-4800 speed with CL40 latency delivers the rated throughput your server expects
  • Registered ECC design corrects single-bit errors and stabilises every slot at full load
  • 1 V operation matches the board's voltage requirement for reliable POST
  • 288-pin RDIMM form factor fits the exact memory slots on the H13SST-G

Exact-match DDR5-4800 kit for Supermicro H13SST-G

This 96GB kit contains six 16GB DDR5-4800 Registered ECC RDIMMs built to the 1Rx8 rank, 1.1V voltage and CL40 timing that the Supermicro H13SST-G memory controller expects. It is designed for servers and workstations that require the full 96GB capacity across all populated slots.

DDR5 RDIMM population limits

Registered DDR5 architecture allows every 288-pin slot to run fully populated at the rated 4800 MT/s speed without down-clocking, while the buffer offloads the memory controller. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads.

1Rx8 rank and CL40 timing decide fit

The 1Rx8 organization and CL40 latency are the single specification the board's firmware validates during POST; a different rank or timing will not be recognised at full capacity or speed. Verify the manual for approved DIMM population order before installation.

Highlights

  • 96 GB capacity in a six-module kit lets you fully populate the Supermicro H13SST-G
  • DDR5-4800 speed with CL40 latency delivers the rated throughput your server expects
  • Registered ECC design corrects single-bit errors and stabilises every slot at full load
  • 1 V operation matches the board's voltage requirement for reliable POST
  • 288-pin RDIMM form factor fits the exact memory slots on the H13SST-G

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 96GB 6x16GB kit or a different capacity for my Supermicro H13SST-G?

The 96GB kit uses six 16GB RDIMMs, filling six slots at DDR5-4800 CL40 1.10V 1Rx8 registered ECC. Check your motherboard manual for supported capacities and the approved DIMM population order before deciding.

What does DDR5-4800 mean for real-world throughput in this server?

DDR5-4800 (PC5-38400) sets the maximum data rate at 4800 MT/s per module. With six registered ECC DIMMs installed, the memory controller runs all slots at that rated speed, delivering the bandwidth the platform expects for production workloads.

How does the 288-pin RDIMM interface limit what I can install?

The kit uses 288-pin DDR5 RDIMMs with registered (buffered) architecture and ECC. Your board requires this exact form factor — UDIMMs or SODIMMs will not fit or function. The registered design also allows full-capacity operation across all populated slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.