BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278929BTC
Skladom
NEMIX RAM
NEMIX RAM DDR5 5600 64GB 4x16GB ECC RDIMM CL46 1.1V Supermicro H13SSF memory upgrade
64 GB DDR5 ECC registered kit in four 16 GB modules running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro H13SSF motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 64 GB total capacity from four 16 GB modules for full server density
- DDR5 5600 speed with CL46 latency runs at rated performance
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the Supermicro H13SSF memory controller specification
- 288-pin RDIMM form factor fits the required motherboard slots exactly
Exact-match server kit
This 64 GB kit contains four 16 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. It is built for the Supermicro H13SSF motherboard and will only work in systems that require registered ECC memory.
DDR5 RDIMM constraints
Registered DIMMs add a buffer that lets the memory controller drive every slot at full speed, but the modules will not fit or function in boards that accept only unbuffered UDIMMs or SODIMMs. ECC corrects single-bit errors automatically, yet it cannot protect against multi-bit failures or replace a backup strategy.
Four-slot installation
Populate all four slots following the motherboard manual’s population order; skipping the sequence can prevent the system from posting at the rated 5600 MT/s. Modules have no heat spreaders, so ensure chassis airflow reaches the chips directly.
Prednosti
- 64 GB total capacity from four 16 GB modules for full server density
- DDR5 5600 speed with CL46 latency runs at rated performance
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the Supermicro H13SSF memory controller specification
- 288-pin RDIMM form factor fits the required motherboard slots exactly
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Should I buy the 64GB kit as four 16GB modules or look for a different capacity?
The kit is supplied as four 16GB modules totalling 64GB. This matches the exact rank and voltage the Supermicro H13SSF memory controller expects for full-capacity recognition at rated speed.
What does the DDR5 5600 rating deliver once the modules are installed in the H13SSF?
The modules run at 5600 MT/s with CL46 latency at 1.1V. Registered buffering lets every slot stay fully populated at that speed while ECC corrects single-bit errors on the fly.
Does the 288-pin RDIMM interface limit the bandwidth or capacity I can use?
The 288-pin Registered DDR5 form factor is what the H13SSF requires. It supports the kit's 5600 MT/s data rate and 64GB total capacity without down-clocking or population restrictions.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
