Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules in a clear plastic tray

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 4x16GB ECC RDIMM CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-C65T-2VPNY

64 GB DDR5 ECC registered kit in four 16 GB modules running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro H13SSF motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four 16 GB modules for full server density
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H13SSF memory controller specification
  • 288-pin RDIMM form factor fits the required motherboard slots exactly

Exact-match server kit

This 64 GB kit contains four 16 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. It is built for the Supermicro H13SSF motherboard and will only work in systems that require registered ECC memory.

DDR5 RDIMM constraints

Registered DIMMs add a buffer that lets the memory controller drive every slot at full speed, but the modules will not fit or function in boards that accept only unbuffered UDIMMs or SODIMMs. ECC corrects single-bit errors automatically, yet it cannot protect against multi-bit failures or replace a backup strategy.

Four-slot installation

Populate all four slots following the motherboard manual’s population order; skipping the sequence can prevent the system from posting at the rated 5600 MT/s. Modules have no heat spreaders, so ensure chassis airflow reaches the chips directly.

Přednosti

  • 64 GB total capacity from four 16 GB modules for full server density
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H13SSF memory controller specification
  • 288-pin RDIMM form factor fits the required motherboard slots exactly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Should I buy the 64GB kit as four 16GB modules or look for a different capacity?

The kit is supplied as four 16GB modules totalling 64GB. This matches the exact rank and voltage the Supermicro H13SSF memory controller expects for full-capacity recognition at rated speed.

What does the DDR5 5600 rating deliver once the modules are installed in the H13SSF?

The modules run at 5600 MT/s with CL46 latency at 1.1V. Registered buffering lets every slot stay fully populated at that speed while ECC corrects single-bit errors on the fly.

Does the 288-pin RDIMM interface limit the bandwidth or capacity I can use?

The 288-pin Registered DDR5 form factor is what the H13SSF requires. It supports the kit's 5600 MT/s data rate and 64GB total capacity without down-clocking or population restrictions.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.