BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00281088BTC
Skladom
NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 96GB (6x16GB) CL52 1.1V Supermicro H13SST-GC
Sixteen-gigabyte DDR5 registered ECC modules in a 96 GB kit run at 6400 MT/s with CL52 latency and 1.1 V for Supermicro H13SST-GC servers
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB total capacity lets you fill six slots for maximum server density
- Registered ECC design offloads the memory controller and corrects single-bit errors on the fly
- DDR5 6400 speed with CL52 latency delivers rated throughput at 1.1 V
- 1Rx8 288-pin RDIMM form factor matches the Supermicro H13SST-GC motherboard exactly
- Six 16 GB modules provide full-kit population without mixing ranks or voltages
Exact-match upgrade kit
This 96 GB kit contains six 16 GB DDR5 registered ECC RDIMMs rated at 6400 MT/s with CL52 latency and 1.10 V operation. The modules use a 288-pin form factor and 1Rx8 organisation, matching the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects for full-capacity recognition at rated speed.
Suited for populated server builds
The registered architecture offloads the memory controller so every slot runs fully populated while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Builders who need unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a different pin count should look at other products.
Critical specification
Registered ECC RDIMM is the single attribute that determines compatibility; the H13SST-GC requires this buffered 288-pin DDR5 type and will not accept unregistered or alternative form-factor modules.
Prednosti
- 96 GB total capacity lets you fill six slots for maximum server density
- Registered ECC design offloads the memory controller and corrects single-bit errors on the fly
- DDR5 6400 speed with CL52 latency delivers rated throughput at 1.1 V
- 1Rx8 288-pin RDIMM form factor matches the Supermicro H13SST-GC motherboard exactly
- Six 16 GB modules provide full-kit population without mixing ranks or voltages
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I install the six 288-pin DDR5 RDIMM modules in the Supermicro H13SST-GC and what slot order is most often missed?
Power down, open the chassis, and insert each 16 GB stick into the exact DIMM sequence shown in the Supermicro H13SST-GC manual; the step most people skip is following that prescribed population order so all six 1Rx8 modules initialise at DDR5 6400 CL52.
What maintenance or replacement will this 96 GB DDR5 ECC RDIMM kit need over its service life?
No routine maintenance is required; if a module ever fails the lifetime replacement warranty covers a straight swap of the defective 16 GB RDIMM, and ECC continues correcting single-bit errors on the remaining sticks.
What is the first limit that appears when the 6 x 16 GB DDR5 6400 kit runs fully populated under sustained load?
The memory controller’s maximum supported speed of DDR5 6400 (PC5-51200) at 1.1 V CL52 is the ceiling; all six registered 1Rx8 DIMMs operate at that rated frequency without down-clocking.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
