暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 96GB (6x16GB) CL52 1.1V Supermicro H13SST-GC

SKU CH-N5HV-VPBKQ

Sixteen-gigabyte DDR5 registered ECC modules in a 96 GB kit run at 6400 MT/s with CL52 latency and 1.1 V for Supermicro H13SST-GC servers

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 96 GB total capacity lets you fill six slots for maximum server density
  • Registered ECC design offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 6400 speed with CL52 latency delivers rated throughput at 1.1 V
  • 1Rx8 288-pin RDIMM form factor matches the Supermicro H13SST-GC motherboard exactly
  • Six 16 GB modules provide full-kit population without mixing ranks or voltages

Exact-match upgrade kit

This 96 GB kit contains six 16 GB DDR5 registered ECC RDIMMs rated at 6400 MT/s with CL52 latency and 1.10 V operation. The modules use a 288-pin form factor and 1Rx8 organisation, matching the exact rank, voltage and timing the Supermicro H13SST-GC memory controller expects for full-capacity recognition at rated speed.

Suited for populated server builds

The registered architecture offloads the memory controller so every slot runs fully populated while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Builders who need unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a different pin count should look at other products.

Critical specification

Registered ECC RDIMM is the single attribute that determines compatibility; the H13SST-GC requires this buffered 288-pin DDR5 type and will not accept unregistered or alternative form-factor modules.

特長

  • 96 GB total capacity lets you fill six slots for maximum server density
  • Registered ECC design offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 6400 speed with CL52 latency delivers rated throughput at 1.1 V
  • 1Rx8 288-pin RDIMM form factor matches the Supermicro H13SST-GC motherboard exactly
  • Six 16 GB modules provide full-kit population without mixing ranks or voltages

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How do I install the six 288-pin DDR5 RDIMM modules in the Supermicro H13SST-GC and what slot order is most often missed?

Power down, open the chassis, and insert each 16 GB stick into the exact DIMM sequence shown in the Supermicro H13SST-GC manual; the step most people skip is following that prescribed population order so all six 1Rx8 modules initialise at DDR5 6400 CL52.

What maintenance or replacement will this 96 GB DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required; if a module ever fails the lifetime replacement warranty covers a straight swap of the defective 16 GB RDIMM, and ECC continues correcting single-bit errors on the remaining sticks.

What is the first limit that appears when the 6 x 16 GB DDR5 6400 kit runs fully populated under sustained load?

The memory controller’s maximum supported speed of DDR5 6400 (PC5-51200) at 1.1 V CL52 is the ceiling; all six registered 1Rx8 DIMMs operate at that rated frequency without down-clocking.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。