BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278448BTC
Skladom
NEMIX RAM
NEMIX RAM MR51200-724K8 1TB 8x128GB DDR5 6400 CL52 RDIMM Supermicro H13SSL-NT
Eight-module kit provides 1 TB of DDR5 ECC registered memory at 6400 MT/s for the Supermicro H13SSL-NT motherboard
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed rated at PC5-51200 bandwidth
- Registered ECC design corrects single-bit errors automatically
- 1V operation at CL52 latency matches motherboard specs
- Verified compatible with Supermicro H13SSL-NT motherboard
Exact DDR5-6400 RDIMM kit for Supermicro H13SSL-NT
This 1 TB kit contains eight 128 GB DDR5 registered DIMMs running at 6400 MT/s with CL52 latency and 1.10 V operation. Each module is a 288-pin RDIMM with 2Rx4 organisation and on-die ECC, built from major OEM Samsung, Micron or Hynix components. It is designed for servers that require registered memory and will not work in platforms that accept only unbuffered UDIMMs or SODIMMs.
Sustained-load behaviour
The registered buffer reduces electrical load on the memory controller, allowing all eight slots to remain fully populated at the rated 6400 MT/s without down-clocking. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long-running compute or database workloads. Operation at 1.10 V keeps power draw predictable under continuous utilisation.
Replaces partial or slower memory configurations
This kit replaces any smaller-capacity or lower-speed DDR5 RDIMM set that leaves DIMM slots empty or forces the controller to run below 6400 MT/s. The jump is worth it when the workload demands the full 1 TB at native speed with registered ECC stability. It is not for systems that require UDIMMs, SODIMMs, or non-ECC memory.
Prednosti
- 1TB capacity with eight 128GB modules for maximum server density
- DDR5 6400 speed rated at PC5-51200 bandwidth
- Registered ECC design corrects single-bit errors automatically
- 1V operation at CL52 latency matches motherboard specs
- Verified compatible with Supermicro H13SSL-NT motherboard
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How much power does the 1.10V DDR5 6400 kit draw when the server runs all day?
Each module operates at 1.10 volts, the standard DDR5 voltage, so total power scales with the eight 128 GB sticks installed; the registered design also reduces electrical load on the memory controller during sustained workloads.
What motherboard slot and population rules must my Supermicro H13SSL-NT already have to accept this 8×128 GB kit?
The board needs eight free 288-pin RDIMM slots and must support 2Rx4 registered ECC DIMMs at DDR5 6400; consult the manual for the exact population order required for a full 1 TB configuration.
Will these CL52 registered ECC modules work alongside any older DDR5 DIMMs I might still have?
Mixing is not recommended; the kit is validated as a matched 8×128 GB set at CL52 1.10 V, and adding different ranks, speeds or latencies can prevent the server from training at the rated 6400 MT/s.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
