Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black square 60mm CPU cooler fan with 2-pin connector

OEM Industries

OEM Industries KD1206PHS2 60mm 12V 1.9W 2-Pin CPU cooler

SKU CH-N5KM-C165X

A 60 mm square fan cooler running at 12 V and 1.9 W with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

Compact 60 mm square cooler

The OEM Industries KD1206PHS2 is a 60 mm square fan designed for direct CPU or case cooling. It runs on 12 V and draws 1.9 W through a two-pin power connector. A sleeve bearing keeps the assembly simple and cost-effective.

Suits tight spaces and low-power builds

This cooler fits small-form-factor chassis or legacy sockets where a 60 mm footprint is required. Builders needing higher airflow, PWM speed control or quiet operation at load should consider larger alternatives.

Mounts in standard 60 mm cut-outs

The fan installs in any 60 mm square mounting pattern without additional brackets. Its two-pin lead connects directly to a motherboard header or fan controller, leaving four-pin headers free for PWM devices. No LED lighting means no extra cables to route.

Prednosti

  • Compact 60 mm frame fits tight chassis
  • 12 V 1.9 W draw keeps power use low
  • Two-pin connector enables simple motherboard hookup
  • Sleeve bearing runs quietly at idle
  • Square cooler design directs airflow over CPU

Špecifikácie

ModelKD1206PHS2
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Otázky k tomuto produktu

Does my motherboard need a 2-pin fan header to run the KD1206PHS2 cooler?

Yes, the cooler uses a 2-pin power connector, so your board must provide a matching 2-pin fan header.

Will the 60 mm square frame of this cooler clear the mounting holes on my older socket board?

The cooler has a 60 mm square footprint; check your board’s mounting-hole spacing against those dimensions before installing.

How can I confirm the 12 V 1.9 W fan is spinning correctly after I fit it?

Power the system and verify the fan rotates; you can also monitor the fan speed in the BIOS or a hardware-monitoring utility.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.