OWC 64GB (2x32GB) DDR3L 1600 CL11 4Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade
- 64GB (2 x 32GB)
- 240-Pin DDR3L ECC R…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
128 GB DDR3L ECC registered kit in four 32 GB modules at 1600 MHz for Supermicro A+ servers
Capacity 128GB (4 x 32GB)
This 128GB kit contains four 32GB DDR3L 1600 CL11 registered DIMMs built for Supermicro A+ Server 2022TC, 2022TG, 4022G and 4042G systems. It is designed for workstation and server platforms that require ECC registered memory. It will not work in standard desktop computers or alongside unbuffered modules.
Each module runs at 1.35 volts under the PC3L-12800 JEDEC standard, reducing power draw and heat compared to standard DDR3. The registered buffer and ECC functionality add minimal overhead while maintaining data integrity. No heat spreaders are fitted, so airflow through the server chassis handles cooling.
The 240-pin DDR3L RDIMMs use a 4Rx4 organisation and must occupy slots that support registered ECC memory. Mixing with unbuffered DIMMs is not supported. The kit is validated for the listed Supermicro A+ Server series and complies with JEDEC and RoHS requirements.
| Brand | OWC |
|---|---|
| Part Number | 1R6T34R4128S |
| Capacity | 128GB (4 x 32GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro A+ Server 2022TC Series Supermicro A+ Server 2022TG Series Supermicro A+ Server 4022G Series Supermicro A+ Server 4042G Series |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Power off the server, open the chassis, align each 240-pin module with the DIMM slot notch, and press firmly until both retention clips click. The step often missed is populating all four channels in the order specified by the Supermicro A+ Server manual to enable quad-channel operation.
The modules have no heat spreaders and no moving parts, so no routine maintenance is required. Replacement is only needed if a module fails ECC error correction, which the registered design helps prevent by reducing electrical load on the memory controller.
The 1.35 V DDR3L voltage and CL11 latency set the thermal and timing envelope. Under sustained load the memory controller reaches its maximum sustainable bandwidth at PC3L-12800 before temperature or voltage limits become a factor.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?