Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR3L ECC RDIMM sticks side by side

OWC

OWC 1R6T31R4016P 16GB (2x8GB) DDR3L 1600 CL11 ECC RDIMM memory upgrade

SKU CH-YRD6-TXH77

16GB DDR3L ECC registered DIMM kit for Supermicro H8, X10 server boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16GB dual-channel kit boosts multitasking capacity
  • DDR3L 1600 CL11 speed matches system requirements
  • 35V low voltage reduces power draw
  • Validated for Supermicro H8QGL H8SCM X10DBT X10QBi X10QBL motherboards

System-specific ECC upgrade

This OWC kit supplies 16 GB of DDR3L ECC registered memory in two 8 GB modules. It is built for Supermicro H8QGL, H8SCM, X10DBT, X10QBi and X10QBL series motherboards used in workstations and servers. The modules will not work in standard desktop computers.

DDR3L 1600 registered limits

The memory runs at 1600 MHz with CL11 latency at 1.35 V. Registered DIMMs require a motherboard chipset and BIOS that support buffered operation; they cannot be mixed with unbuffered modules. Capacity per slot is fixed at 8 GB with this kit.

240-pin RDIMM practicalities

Each module uses a standard 240-pin DDR3 DIMM form factor without a heat spreader, fitting typical server DIMM slots. The low-profile height aids airflow in dense chassis. Installation follows normal DIMM alignment; no extra cables or brackets are needed.

Prednosti

  • ECC registered design protects data integrity in servers
  • 16GB dual-channel kit boosts multitasking capacity
  • DDR3L 1600 CL11 speed matches system requirements
  • 35V low voltage reduces power draw
  • Validated for Supermicro H8QGL H8SCM X10DBT X10QBi X10QBL motherboards

Špecifikácie

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard H8QGL Series
Supermicro Motherboard H8SCM Series
Supermicro Motherboard X10DBT Series
Supermicro Motherboard X10QBi Series
Supermicro Motherboard X10QBL Series

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I buy the 16 GB kit or look for a larger capacity?

This kit provides 16 GB as two 8 GB modules; if your Supermicro board has free 240-pin slots you can add more identical kits up to the board's maximum.

What does the 1600 speed rating deliver in a running server?

The modules run at DDR3L 1600 with CL11 timing, giving the bandwidth and latency the X10 or H8 series memory controllers are designed for.

Does the PC3L-12800 label limit the memory controller in any way?

PC3L-12800 is the JEDEC standard name for DDR3L 1600; the registered ECC design lets the motherboard's controller drive each DIMM at that rated speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.