Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small brass T-shaped adapter with three female G 1/4in threads, coated finish, 23.9mm cube

PrimoChill

PrimoChill G 1/4in 3-Way SX Female T Adapter diy cooling

SKU CH-83AM-XK5N6

G 1/4in three-way female T adapter splits or combines liquid-cooling loops at 90 degrees and provides an inline fill or drain point, made from coated brass measuring 23.9mm per side

  • TypeCPU Block

Option UV Red

Zobraziť ďalších 9 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Split or combine your loop at a 90 degree angle
  • Create an inline fill or drain access point easily
  • G 1/4in thread fits standard water-cooling fittings
  • Compact 23.9mm cube design saves space in tight builds
  • Coated brass construction resists corrosion for long-term use

Loop splitting adapter

The PrimoChill G 1/4in 3-Way SX Female T Adapter splits or combines a custom liquid-cooling loop at a 90 degree angle. It also serves as an inline fill or drain access point. The coated brass body measures 23.9mm on each side. It is aimed at DIY builders who need a compact branching point.

Thread constraint

Every port uses a G 1/4in thread, so only fittings and components with that exact thread will seal correctly. The three-port layout fixes the flow geometry to a single 90 degree split. Builders who need more than three connection points cannot use this adapter alone.

Coated brass construction

The entire adapter is made from coated brass, which determines corrosion resistance and mechanical strength in a liquid-cooling loop. No other material is present in the fluid path. Buyers who require a different metal or an uncoated surface will need a different part.

Prednosti

  • Split or combine your loop at a 90 degree angle
  • Create an inline fill or drain access point easily
  • G 1/4in thread fits standard water-cooling fittings
  • Compact 23.9mm cube design saves space in tight builds
  • Coated brass construction resists corrosion for long-term use

Špecifikácie

TypeCPU Block

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I use this T adapter to split my cooling loop?

Connect G 1/4in fittings to the three ports to branch flow at a 90 degree angle or create an inline fill and drain point.

What does the G 1/4in thread mean for my build?

It matches standard water-cooling fittings so the adapter screws directly into blocks, radiators or reservoirs with the same thread.

How much space does the 23.9mm cube need inside the case?

The adapter measures 23.9mm on each side so allow at least that much clearance plus room for the attached fittings and tubing.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.