Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR3 memory module with gold edge connectors and black chips on both sides

SK hynix

SK hynix 8 GB DDR3 PC3-10600 1333MHz memory upgrade for HP ProLiant DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6

SKU CH-3NNQ-BFDRA

8 GB DDR3 server memory running at 1333 MHz for compatible HP ProLiant systems

  • 8 GB capacity expands server memory headroom
  • DDR3 PC3-10600 1333MHz bus speed matches system specs
  • 5 V operating voltage fits ProLiant power envelopes
  • 240-pin 2Rx4 dual-rank layout aligns with DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6 slots
  • New SK hynix module validated for workstation and server use

Purpose-built server memory

This 8 GB DDR3 module is engineered specifically for HP ProLiant DL320 G6, DL360 G6, DL360 G7, DL370 G6 and DL380 G6 systems. It targets IT administrators who need to expand memory capacity in these exact rack-mount servers without compatibility risk. Builders working on consumer desktops or non-listed ProLiant models should look elsewhere.

Thermals, noise and power

Operating at a standard 1.5 V supply voltage, the module draws typical DDR3 power for its density and speed. Passive cooling is sufficient in the designed server chassis where forced airflow is already present; no additional fan noise is introduced by the memory itself. The 2Rx4 dual-rank organisation keeps electrical loading within the platform’s validated limits.

Deciding specification

The module runs at PC3-10600 1333 MHz bus speed with a 240-pin interface and 2Rx4 dual-rank layout. This exact combination of speed, rank and pin-out is what the listed ProLiant models require; a different rank count or speed grade will not be recognised by the system BIOS.

Prednosti

  • 8 GB capacity expands server memory headroom
  • DDR3 PC3-10600 1333MHz bus speed matches system specs
  • 5 V operating voltage fits ProLiant power envelopes
  • 240-pin 2Rx4 dual-rank layout aligns with DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6 slots
  • New SK hynix module validated for workstation and server use

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the 240-pin DDR3 module in an HP ProLiant DL360 G6, and which step do people often miss?

Power down the server, open the chassis, locate the DIMM slots, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then close the chassis. The step often missed is verifying the module seats fully on both ends so the clips engage.

What maintenance or replacement will the 8 GB 2Rx4 DDR3 module need later?

No scheduled maintenance is required for the memory itself. Replacement is only needed if a module fails diagnostics or if capacity must be increased beyond the current 8 GB configuration.

What limit appears first on the PC3-10600 1333MHz kit under sustained server workloads?

The 1333 MHz bus speed and 1.5 V operating voltage set the throughput ceiling; sustained heavy loads will hit that bandwidth limit before thermal or voltage constraints become an issue.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.