نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular DDR3 memory module with gold edge connectors and black chips on both sides

SK hynix

SK hynix 8 GB DDR3 PC3-10600 1333MHz memory upgrade for HP ProLiant DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6

SKU CH-3NNQ-BFDRA

8 GB DDR3 server memory running at 1333 MHz for compatible HP ProLiant systems

  • 8 GB capacity expands server memory headroom
  • DDR3 PC3-10600 1333MHz bus speed matches system specs
  • 5 V operating voltage fits ProLiant power envelopes
  • 240-pin 2Rx4 dual-rank layout aligns with DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6 slots
  • New SK hynix module validated for workstation and server use

Purpose-built server memory

This 8 GB DDR3 module is engineered specifically for HP ProLiant DL320 G6, DL360 G6, DL360 G7, DL370 G6 and DL380 G6 systems. It targets IT administrators who need to expand memory capacity in these exact rack-mount servers without compatibility risk. Builders working on consumer desktops or non-listed ProLiant models should look elsewhere.

Thermals, noise and power

Operating at a standard 1.5 V supply voltage, the module draws typical DDR3 power for its density and speed. Passive cooling is sufficient in the designed server chassis where forced airflow is already present; no additional fan noise is introduced by the memory itself. The 2Rx4 dual-rank organisation keeps electrical loading within the platform’s validated limits.

Deciding specification

The module runs at PC3-10600 1333 MHz bus speed with a 240-pin interface and 2Rx4 dual-rank layout. This exact combination of speed, rank and pin-out is what the listed ProLiant models require; a different rank count or speed grade will not be recognised by the system BIOS.

أبرز المميزات

  • 8 GB capacity expands server memory headroom
  • DDR3 PC3-10600 1333MHz bus speed matches system specs
  • 5 V operating voltage fits ProLiant power envelopes
  • 240-pin 2Rx4 dual-rank layout aligns with DL320 G6 DL360 G6 G7 DL370 G6 DL380 G6 slots
  • New SK hynix module validated for workstation and server use

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

How do I install the 240-pin DDR3 module in an HP ProLiant DL360 G6, and which step do people often miss?

Power down the server, open the chassis, locate the DIMM slots, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then close the chassis. The step often missed is verifying the module seats fully on both ends so the clips engage.

What maintenance or replacement will the 8 GB 2Rx4 DDR3 module need later?

No scheduled maintenance is required for the memory itself. Replacement is only needed if a module fails diagnostics or if capacity must be increased beyond the current 8 GB configuration.

What limit appears first on the PC3-10600 1333MHz kit under sustained server workloads?

The 1333 MHz bus speed and 1.5 V operating voltage set the throughput ceiling; sustained heavy loads will hit that bandwidth limit before thermal or voltage constraints become an issue.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.