Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green PCB expansion card with four SATA ports and one M.2 B-key slot, full-height bracket

Syba

Syba SI-PEX40138 4-port SATA + M.2 B-key expansion card

SKU CH-SBV1-5CXKB MPN SI-PEX40138

Adds four SATA III ports and an M.2 B-key 2242 slot via a PCI-e x4 slot for up to 1700 MB/s

  • TypePCI Express to SATA Card
  • Internal Ports4 x SATA III + 1 x M.2 B-Key
  • Data Transfer RateUp to 1700 MB/s
  • FeaturesConnect four SATA drives and one M.2 B-key SSD to any free P
  • Package Contents(1) 4 Port SATA + M.2 B-key PCI-e x4 Controller (4) SATA Cab
  • Add four SATA drives and one M.2 B-key SSD through a single PCI-e x4 slot
  • Reach up to 1700 MB/s throughput for fast data access
  • Works immediately with plug-and-play — no driver setup required
  • Includes four SATA cables so drives connect right away
  • Supports M.2 2242 B-key modules for compact storage expansion

Four SATA and one M.2 B-key port

This Syba SI-PEX40138 controller card adds four SATA III connections and a single M.2 B-key 2242 slot through a PCI Express x4 interface. It is built for desktop owners who need extra internal storage connectors without using a RAID configuration. The card supports data rates up to 1700 MB/s and works plug-and-play with no extra driver installation required. Four SATA cables are included in the package.

Suits builds needing mixed SATA and M.2 B-key drives

This card fits systems that have a free PCIe x4 slot and want to run both standard SATA hard drives or SSDs plus an M.2 B-key 2242 module at the same time. It is not for users who require hardware RAID functions or who need to connect M.2 drives with M-key or other keying types. Builders without an available PCIe x4 slot should look at a different solution.

Up to 1700 MB/s aggregate throughput

The quoted maximum transfer rate of 1700 MB/s is the key figure that determines whether this card can feed your drives fast enough for the workload you have in mind. If your application demands sustained bandwidth higher than this level, the card will become the bottleneck. Check your drive specifications and expected workload against this number before deciding.

Prednosti

  • Add four SATA drives and one M.2 B-key SSD through a single PCI-e x4 slot
  • Reach up to 1700 MB/s throughput for fast data access
  • Works immediately with plug-and-play — no driver setup required
  • Includes four SATA cables so drives connect right away
  • Supports M.2 2242 B-key modules for compact storage expansion

Špecifikácie

BrandSYBA
ModelSI-PEX40138
TypePCI Express to SATA Card
Internal Ports4 x SATA III + 1 x M.2 B-Key
Data Transfer RateUp to 1700 MB/s
FeaturesConnect four SATA drives and one M.2 B-key SSD to any free PCI-e x4 slot, providing up to 1700 MB/s speed.
Plug and play supported, no additional software installation or setting required.
Can support Port Multiplier that is not in a RAID configuration.
Complies with PCI Express Base Specification Revision 3.1a. Compatible with SATA hard drives and solid state drives and computer systems with SATA controllers.
This card is only design for storage use only, can not boot any OS / System drives. Important Note: Only work with PCI-E slot, Not for PCI Slot.
Package Contents(1) 4 Port SATA + M.2 B-key PCI-e x4 Controller
(4) SATA Cables
(1) Manaul
Prepravná hmotnosť0.18 kg
Rozmery balenia175 × 140 × 41 mm

Otázky k tomuto produktu

Will the SI-PEX40138 work in an older motherboard that only has a PCI-e x4 slot available?

The SI-PEX40138 installs into any free PCI-e x4 slot and operates without extra software, so it functions with older boards that provide that slot type.

How can I confirm the card is delivering the 1700 MB/s transfer rate after installation?

Run a sequential read test on a drive connected to the card; speeds approaching 1700 MB/s indicate the link is operating at full capability.

Which cables and drives are included with the SI-PEX40138 and what must I source separately?

The box contains the controller card, four SATA cables and a manual; you must supply SATA drives and a 2242 M.2 B-key SSD yourself.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.