نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Syba

Syba SI-PEX40138 4-port SATA + M.2 B-key expansion card

SKU CH-SBV1-5CXKB MPN SI-PEX40138

Adds four SATA III ports and an M.2 B-key 2242 slot via a PCI-e x4 slot for up to 1700 MB/s

  • TypePCI Express to SATA Card
  • Internal Ports4 x SATA III + 1 x M.2 B-Key
  • Data Transfer RateUp to 1700 MB/s
  • FeaturesConnect four SATA drives and one M.2 B-key SSD to any free P
  • Package Contents(1) 4 Port SATA + M.2 B-key PCI-e x4 Controller (4) SATA Cab
  • Add four SATA drives and one M.2 B-key SSD through a single PCI-e x4 slot
  • Reach up to 1700 MB/s throughput for fast data access
  • Works immediately with plug-and-play — no driver setup required
  • Includes four SATA cables so drives connect right away
  • Supports M.2 2242 B-key modules for compact storage expansion

Four SATA and one M.2 B-key port

This Syba SI-PEX40138 controller card adds four SATA III connections and a single M.2 B-key 2242 slot through a PCI Express x4 interface. It is built for desktop owners who need extra internal storage connectors without using a RAID configuration. The card supports data rates up to 1700 MB/s and works plug-and-play with no extra driver installation required. Four SATA cables are included in the package.

Suits builds needing mixed SATA and M.2 B-key drives

This card fits systems that have a free PCIe x4 slot and want to run both standard SATA hard drives or SSDs plus an M.2 B-key 2242 module at the same time. It is not for users who require hardware RAID functions or who need to connect M.2 drives with M-key or other keying types. Builders without an available PCIe x4 slot should look at a different solution.

Up to 1700 MB/s aggregate throughput

The quoted maximum transfer rate of 1700 MB/s is the key figure that determines whether this card can feed your drives fast enough for the workload you have in mind. If your application demands sustained bandwidth higher than this level, the card will become the bottleneck. Check your drive specifications and expected workload against this number before deciding.

أبرز المميزات

  • Add four SATA drives and one M.2 B-key SSD through a single PCI-e x4 slot
  • Reach up to 1700 MB/s throughput for fast data access
  • Works immediately with plug-and-play — no driver setup required
  • Includes four SATA cables so drives connect right away
  • Supports M.2 2242 B-key modules for compact storage expansion

المواصفات

BrandSYBA
ModelSI-PEX40138
TypePCI Express to SATA Card
Internal Ports4 x SATA III + 1 x M.2 B-Key
Data Transfer RateUp to 1700 MB/s
FeaturesConnect four SATA drives and one M.2 B-key SSD to any free PCI-e x4 slot, providing up to 1700 MB/s speed.
Plug and play supported, no additional software installation or setting required.
Can support Port Multiplier that is not in a RAID configuration.
Complies with PCI Express Base Specification Revision 3.1a. Compatible with SATA hard drives and solid state drives and computer systems with SATA controllers.
This card is only design for storage use only, can not boot any OS / System drives. Important Note: Only work with PCI-E slot, Not for PCI Slot.
Package Contents(1) 4 Port SATA + M.2 B-key PCI-e x4 Controller
(4) SATA Cables
(1) Manaul
وزن الشحنة0.18 kg
أبعاد الطرد175 × 140 × 41 mm

أسئلة حول هذا المنتج

Will the SI-PEX40138 work in an older motherboard that only has a PCI-e x4 slot available?

The SI-PEX40138 installs into any free PCI-e x4 slot and operates without extra software, so it functions with older boards that provide that slot type.

How can I confirm the card is delivering the 1700 MB/s transfer rate after installation?

Run a sequential read test on a drive connected to the card; speeds approaching 1700 MB/s indicate the link is operating at full capability.

Which cables and drives are included with the SI-PEX40138 and what must I source separately?

The box contains the controller card, four SATA cables and a manual; you must supply SATA drives and a 2242 M.2 B-key SSD yourself.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.