Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black standalone SD and microSD duplicator with LCD screen and thirty-one slots

Systor

Systor SYS-SD-31 1 to 31 SD/microSD Duplicator

SKU CH-Z507-X287P

Standalone SD and microSD duplicator copies up to 31 cards simultaneously with 256 MB buffer and LCD control

  • TypeSD/MicroSD Duplicator
  • Target1 to 31
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 31

Zobraziť ďalších 1 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Standalone operation eliminates the need for a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware comparison verifies every copy for reliability
  • LCD screen with four-key control shows real-time progress

Systor SYS-SD-31 31-Port Duplicator

The Systor SYS-SD-31 is a standalone SD and microSD duplicator that copies up to 31 target cards simultaneously from a single source slot. It operates without a host computer, using a built-in multi-core processor and 256 MB buffer memory to manage high-speed duplication at up to 2 GB per minute. The unit features an LCD screen with four-button control for menu navigation and real-time status updates.

Suits high-volume SD workflows; not for other media

This duplicator suits organisations that need to clone large batches of SD, SDHC, SDXC, microSD, microSDHC or microSDXC cards quickly and reliably. It supports synchronous and asynchronous copy modes, quick copy for FAT16, FAT32, NTFS and Linux file systems, plus whole-media bit-for-bit duplication for any format. Buyers who need to duplicate USB drives, CFexpress cards, SATA SSDs or optical discs should look at a different duplicator designed for those media types.

31 target slots define throughput

The decisive specification is the 1-to-31 target configuration, which sets the maximum number of cards copied in a single run. A 256 MB buffer and SATA internal connector feed each channel independently in asynchronous mode, while the 300 W, 115/230 V power supply sustains the full load. If your typical batch size exceeds 31 cards, you will need multiple cycles or a higher-capacity system.

Prednosti

  • Standalone operation eliminates the need for a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware comparison verifies every copy for reliability
  • LCD screen with four-key control shows real-time progress

Špecifikácie

BrandSystor
ModelSYS-SD-31
TypeSD/MicroSD Duplicator
Target1 to 31
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 300 W

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What is the maximum number of SD or microSD cards the SYS-SD-31 can duplicate at once?

The unit accepts up to 31 target cards simultaneously, fed from a single source slot in synchronous or asynchronous mode.

How much power does the duplicator draw when running all 31 channels continuously?

The built-in supply is rated for 115/230 V at 50/60 Hz and 300 W, so sustained full-load operation stays within that 300 W envelope.

What host connection does the duplicator need to operate standalone?

None — the SYS-SD-31 is a complete standalone system with its own multi-core processor, LCD and four-key control; no computer or SATA host is required.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.