Team Group
Team Group TM8FFW002T0C134 2TB M.2 2280 PCIe 4.0 x4 NVMe internal SSD
A 2TB M.2 2280 NVMe drive with PCIe 4.0 x4 speeds up to 7000 MB/s read and 6100 MB/s write, using 3D NAND and a graphene heatsink
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Up to 7000 MBps sequential read for fast data access
- Up to 6100 MBps sequential write for quick file saves
- 1000 TBW endurance rating for long-lasting reliability
- 1,500,000 hours MTBF for dependable operation
- Patented graphene heatsink improves heat dissipation and system stability
Capacity and interface
The Team Group TM8FFW002T0C134 is a 2TB M.2 2280 NVMe drive that connects over PCIe 4.0 x4. It is built with 3D QLC NAND and uses host memory buffer caching instead of onboard DRAM. Sequential reads reach 7000 MBps and writes reach 6100 MBps, making it suited for notebook or desktop storage upgrades.
Compatibility check
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and NVMe signalling. The module is sold without a heatsink and measures under 1mm thick, so confirm the available clearance in your chassis. Operating temperature range is 0°C to 70°C and storage range is -40°C to 85°C.
Bundled accessories and software
A graphene thermal pad is included in the tray box to help dissipate heat from the controller and NAND. Firmware features include garbage collection, TRIM support, LDPC error correction and end-to-end data protection. A patented health monitoring system reports drive status to compatible software tools.
Prednosti
- Up to 7000 MBps sequential read for fast data access
- Up to 6100 MBps sequential write for quick file saves
- 1000 TBW endurance rating for long-lasting reliability
- 1,500,000 hours MTBF for dependable operation
- Patented graphene heatsink improves heat dissipation and system stability
Špecifikácie
| Brand | Team Group |
|---|---|
| Series | T-FORCE Z44A7Q |
| Model | TM8FFW002T0C134 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6100 MBps |
| Terabytes Written (TBW) | 1000TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G/0.5ms |
| Max Vibration Resistance | 80Hz~2,000Hz/20G |
| Height | 3.7mm |
| Width | 80.0mm |
| Depth | 22.0mm |
| Weight | 7g |
| Prepravná hmotnosť | 0.20 kg |
| Rozmery balenia | 124 × 94 × 12 mm |
Otázky k tomuto produktu
Will this 2TB M.2 2280 drive fit in my laptop's single-sided slot?
Yes, the board is under 1 mm thick with no heatsink, so it clears tight single-sided M.2 slots in thin notebooks.
My motherboard only has PCIe 3.0 x4 — will I lose much speed?
The drive runs at PCIe 4.0 x4 for up to 7000 MB/s read and 6100 MB/s write; on a 3.0 slot it will operate at the slot's lower ceiling.
Is any extra cooling needed for sustained writes?
A patented graphene heatsink is pre-applied, and the drive is rated for 0 °C to 70 °C operation without additional cooling.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Iomega Corp Z250ATAPI BLACK 250MB ZIP backup drive
- 250MB
- 2941RPM
DELL 7T0DW 600GB 2.5" SAS 10000 RPM laptop hard drive
- Serial Attached SCS…
- 10000 RPM
Seagate ST500LT015 500GB 5400 RPM 16MB Cache SATA 6.0Gb/s 2.5" 7mm laptop hard drive
- 500GB
- 5400 RPM



