Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Yellow 24-inch metal drum fan on freestanding frame with rubber castors, tilt mechanism and top carry handles

Tornado HI-FAN-DRUM24-1P 24 Inch Industrial Cooling Fan Yellow

SKU CH-GGFF-A5610

A 24 inch metal drum fan moves up to 8540 CFM with three speeds, 360 degree tilt and ETL safety listing

  • TypeFreestanding
  • Air Flow8540 cubic_feet_per_minute
  • Motor RPM1100 rpm
  • Motor TypeOpen Air Over
  • Fan RPM1100 rpm
  • Voltage120/240
  • Moves large air volumes with 8540 CFM high-velocity output
  • Durable metal construction with powder-coated steel and aluminum blades
  • Tilts full 360 degrees for flexible directional airflow
  • Three-speed control delivers 7700, 6000 or 5000 CFM options
  • ETL safety listed and OSHA compliant for workplace use

Industrial Air Circulation

The Tornado HI-FAN-DRUM24-1P is a 24 inch freestanding drum fan built for industrial and commercial spaces such as warehouses, workshops and greenhouses. It moves up to 8540 cubic feet per minute through three aluminium blades driven by a 1/3 HP open air over motor. The unit suits users who need high-volume airflow in fixed indoor locations.

Power and Interface Limits

The fan operates on 120V corded power with a 2.1 amp draw and 230 watts consumption, supplied through an 8 foot SJT-R cord ending in an IEC C14 connector. Three rotary speed settings deliver 7700, 6000 and 5000 CFM at a constant 1100 RPM. Maximum noise output is 75 decibels and the housing tilts 360 degrees for directional control.

Deciding Specification

The 8540 CFM maximum airflow rating determines whether this model matches the ventilation demand of the intended space. Buyers who need higher static pressure for ducted systems or lower noise for office environments should consider alternative designs. The ETL listed, powder coated metal construction meets UL507 and OSHA compliance for industrial safety.

Prednosti

  • Moves large air volumes with 8540 CFM high-velocity output
  • Durable metal construction with powder-coated steel and aluminum blades
  • Tilts full 360 degrees for flexible directional airflow
  • Three-speed control delivers 7700, 6000 or 5000 CFM options
  • ETL safety listed and OSHA compliant for workplace use

Špecifikácie

TypeFreestanding
BrandTornado
ModelHI-FAN-DRUM24-1P
Air Flow8540 cubic_feet_per_minute
Motor RPM1100 rpm
Motor TypeOpen Air Over
Fan RPM1100 rpm
Voltage120/240
Hznot_applicable
PhaseIEC C14, 120, Corded Electric
Amps20
MaterialMetal
Horsepower20
Mount TypeFreestanding
Fan Typefloor_fan
Parts1 Year
Labor1 Year
Part NumberHI-FAN-DRUM24-1P

Otázky k tomuto produktu

Which airflow rating should I use when comparing this fan to other models?

The specification lists 8540 CFM as the air flow capacity, while the manufacturer highlights 7700 CFM on the highest of three speed settings. Use 8540 CFM for the maximum rated output.

What does the 75 dB noise level mean when the fan is running in a workshop?

At 75 decibels the fan is roughly as loud as a busy office or a normal conversation at one metre, so it will be clearly audible but not overwhelming in a typical industrial space.

How does the IEC C14 connector and 120 V rating limit where I can plug the fan in?

The unit draws 2.1 A at 120 V through a standard IEC C14 inlet, so it fits a normal North American wall outlet via the supplied 8 ft cord and does not require a dedicated circuit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.