Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black rectangular adapter kit with USB-A, USB-C and SATA connectors plus 12V power supply

Vszerda

Vszerda USB 3.0 Type C SATA IDE Adapter Kit 12V 2A

SKU CH-G23M-71YVW

Connects 2.5" and 3.5" SATA or IDE hard drives, SSDs and optical drives via USB 3.0 Type-C or USB-A with 12 V 2 A power, reaching 5 Gbps transfer speed

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 Type C
  • Achieve up to 5Gbps transfer speeds with UASP support for fast data access
  • Power 3.5" drives reliably using the included 12V 2A AC adapter
  • Hot-swap drives instantly with plug-and-play operation on Windows, Mac OS and Linux
  • Convert 4-pin Molex power to SATA with the supplied adapter for flexible connectivity

Universal SATA & IDE Adapter Kit

This Vszerda kit connects 2.5 or 3.5 inch SATA and IDE hard drives, SSDs or optical drives to a host computer through USB 3.0 Type C or USB-A. It supports drives up to 6 TB and operates on Windows 10, 11, Mac OS and Linux without driver installation. A 12 V 2 A power adapter and a Molex to SATA power cable are included for 3.5 inch devices.

Ideal for data recovery and migration

The adapter suits technicians and home users who need to read legacy IDE disks or swap SATA drives quickly. It can run one SATA and one IDE drive at the same time, but cannot power two IDE drives simultaneously. Buyers who need simultaneous dual IDE operation or internal chassis mounting should consider other solutions.

USB 3.0 Type C interface with UASP

The single specification that decides fit is the USB 3.0 Type C connection supporting up to 5 Gbps with UASP acceleration. Actual throughput depends on the attached drive and host controller. The kit is backward compatible with USB 2.0 and 1.1 ports.

Prednosti

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 Type C
  • Achieve up to 5Gbps transfer speeds with UASP support for fast data access
  • Power 3.5" drives reliably using the included 12V 2A AC adapter
  • Hot-swap drives instantly with plug-and-play operation on Windows, Mac OS and Linux
  • Convert 4-pin Molex power to SATA with the supplied adapter for flexible connectivity

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I connect a 3.5" IDE drive using the Molex-to-SATA power converter?

Plug the 4-pin Molex from the 12V 2A power adapter into the converter, then attach the converter's SATA power plug to the drive; the 3.5" IDE data connector attaches directly to the adapter.

Which parts of the kit may need replacement after heavy use?

The 2-in-1 USB-A and USB-C data cable and the 4-pin Molex-to-SATA power converter are the items most likely to wear out with repeated hot-swap cycles.

What limits sustained transfer speed to 5 Gbps on this adapter?

The USB 3.0 Type-C interface caps throughput at 5 Gbps, and actual speed will vary with the connected drive's performance.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.