Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black rectangular adapter kit with USB-A, USB-C and SATA connectors plus 12V power supply

Vszerda

Vszerda USB 3.0 Type C SATA IDE Adapter Kit 12V 2A

SKU CH-G23M-71YVW

Connects 2.5" and 3.5" SATA or IDE hard drives, SSDs and optical drives via USB 3.0 Type-C or USB-A with 12 V 2 A power, reaching 5 Gbps transfer speed

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 Type C
  • Achieve up to 5Gbps transfer speeds with UASP support for fast data access
  • Power 3.5" drives reliably using the included 12V 2A AC adapter
  • Hot-swap drives instantly with plug-and-play operation on Windows, Mac OS and Linux
  • Convert 4-pin Molex power to SATA with the supplied adapter for flexible connectivity

Universal SATA & IDE Adapter Kit

This Vszerda kit connects 2.5 or 3.5 inch SATA and IDE hard drives, SSDs or optical drives to a host computer through USB 3.0 Type C or USB-A. It supports drives up to 6 TB and operates on Windows 10, 11, Mac OS and Linux without driver installation. A 12 V 2 A power adapter and a Molex to SATA power cable are included for 3.5 inch devices.

Ideal for data recovery and migration

The adapter suits technicians and home users who need to read legacy IDE disks or swap SATA drives quickly. It can run one SATA and one IDE drive at the same time, but cannot power two IDE drives simultaneously. Buyers who need simultaneous dual IDE operation or internal chassis mounting should consider other solutions.

USB 3.0 Type C interface with UASP

The single specification that decides fit is the USB 3.0 Type C connection supporting up to 5 Gbps with UASP acceleration. Actual throughput depends on the attached drive and host controller. The kit is backward compatible with USB 2.0 and 1.1 ports.

Přednosti

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0 Type C
  • Achieve up to 5Gbps transfer speeds with UASP support for fast data access
  • Power 3.5" drives reliably using the included 12V 2A AC adapter
  • Hot-swap drives instantly with plug-and-play operation on Windows, Mac OS and Linux
  • Convert 4-pin Molex power to SATA with the supplied adapter for flexible connectivity

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How do I connect a 3.5" IDE drive using the Molex-to-SATA power converter?

Plug the 4-pin Molex from the 12V 2A power adapter into the converter, then attach the converter's SATA power plug to the drive; the 3.5" IDE data connector attaches directly to the adapter.

Which parts of the kit may need replacement after heavy use?

The 2-in-1 USB-A and USB-C data cable and the 4-pin Molex-to-SATA power converter are the items most likely to wear out with repeated hot-swap cycles.

What limits sustained transfer speed to 5 Gbps on this adapter?

The USB 3.0 Type-C interface caps throughput at 5 Gbps, and actual speed will vary with the connected drive's performance.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.