Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver metal server PSU 200 by 85 by 54 mm with 4 pin 4 pin 7 pin slimline connector

WMtec

WMtec server power supply 180W DPS-180AB-26 A DPS-180AB-30 A PCH019 D18-180P1A PA-1181-3HA/B

SKU CH-Z8TK-WXTCF

180 W replacement power supply for ProDesk 400 G5 and 600 G3 SFF desktops with 4+4+7-pin Slimline connector

  • 180W output powers ProDesk 600 G3 SFF systems
  • 100-240V AC input suits global mains voltages
  • 1V DC rail delivers 14.88A for stable loads
  • 4+4+7 pin Slimline connector fits slimline chassis
  • 200×85×54mm form factor matches original PSU dimensions

Replacement PSU for ProDesk SFF

This 180 W unit fits ProDesk 400 G5 and 600 G3 small-form-factor desktops. It accepts 100-240 V AC at 2.3 A and delivers 12.1 V DC up to 14.88 A. The part ships under one of several listed model numbers at random. It is a direct swap for the original factory supply.

Thermals and power draw

The 180 W rating matches the system’s original specification so typical office workloads stay within design limits. AC input spans 50-60 Hz at 100-240 V for worldwide voltage compatibility. No fan-speed or acoustic data is provided by the supplier.

Connectors and mounting

Output uses a combined 4-pin, 4-pin and 7-pin slimline connector that plugs straight into the motherboard. The chassis measures 200 by 85 by 54 mm to match the SFF bay. Buyers needing a different pin layout or higher wattage for upgraded components should look elsewhere.

Prednosti

  • 180W output powers ProDesk 600 G3 SFF systems
  • 100-240V AC input suits global mains voltages
  • 1V DC rail delivers 14.88A for stable loads
  • 4+4+7 pin Slimline connector fits slimline chassis
  • 200×85×54mm form factor matches original PSU dimensions

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the 4Pin+4Pin+7Pin Slimline connector into the ProDesk 600 G3 SFF?

Align the 4Pin+4Pin+7Pin Slimline connector with the motherboard socket, press firmly until it clicks, then secure the PSU with the chassis screws; the step often missed is fully seating the 7Pin section before tightening.

What maintenance will this 180W unit need over time?

Clean dust from the intake vents every six months using compressed air; the internal fan bearings are the only wear item and cannot be lubricated by the user.

At what point does the 12.1V 14.88A rail hit its limit during sustained load?

The 180W maximum power rating is reached when the 12.1V rail delivers 14.88A continuously; beyond that the protection circuit shuts the unit down.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.