暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal server PSU 200 by 85 by 54 mm with 4 pin 4 pin 7 pin slimline connector

WMtec

WMtec server power supply 180W DPS-180AB-26 A DPS-180AB-30 A PCH019 D18-180P1A PA-1181-3HA/B

SKU CH-Z8TK-WXTCF

180 W replacement power supply for ProDesk 400 G5 and 600 G3 SFF desktops with 4+4+7-pin Slimline connector

  • 180W output powers ProDesk 600 G3 SFF systems
  • 100-240V AC input suits global mains voltages
  • 1V DC rail delivers 14.88A for stable loads
  • 4+4+7 pin Slimline connector fits slimline chassis
  • 200×85×54mm form factor matches original PSU dimensions

Replacement PSU for ProDesk SFF

This 180 W unit fits ProDesk 400 G5 and 600 G3 small-form-factor desktops. It accepts 100-240 V AC at 2.3 A and delivers 12.1 V DC up to 14.88 A. The part ships under one of several listed model numbers at random. It is a direct swap for the original factory supply.

Thermals and power draw

The 180 W rating matches the system’s original specification so typical office workloads stay within design limits. AC input spans 50-60 Hz at 100-240 V for worldwide voltage compatibility. No fan-speed or acoustic data is provided by the supplier.

Connectors and mounting

Output uses a combined 4-pin, 4-pin and 7-pin slimline connector that plugs straight into the motherboard. The chassis measures 200 by 85 by 54 mm to match the SFF bay. Buyers needing a different pin layout or higher wattage for upgraded components should look elsewhere.

特長

  • 180W output powers ProDesk 600 G3 SFF systems
  • 100-240V AC input suits global mains voltages
  • 1V DC rail delivers 14.88A for stable loads
  • 4+4+7 pin Slimline connector fits slimline chassis
  • 200×85×54mm form factor matches original PSU dimensions

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the 4Pin+4Pin+7Pin Slimline connector into the ProDesk 600 G3 SFF?

Align the 4Pin+4Pin+7Pin Slimline connector with the motherboard socket, press firmly until it clicks, then secure the PSU with the chassis screws; the step often missed is fully seating the 7Pin section before tightening.

What maintenance will this 180W unit need over time?

Clean dust from the intake vents every six months using compressed air; the internal fan bearings are the only wear item and cannot be lubricated by the user.

At what point does the 12.1V 14.88A rail hit its limit during sustained load?

The 180W maximum power rating is reached when the 12.1V rail delivers 14.88A continuously; beyond that the protection circuit shuts the unit down.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。