Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 92 mm maglev case fan 25 mm thick 4 pin connector

Zyvpee

Zyvpee KDE1209PTVX 92 mm 25 mm 4-pin maglev case fan

SKU CH-BSEZ-NHKK6

A 92 mm maglev case fan with a 25 mm profile, 12 V 4.4 W draw and a 4-pin connector for CPU cooler mounting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W draw keeps power use low
  • 92 mm × 25 mm size fits standard 9225 mounts
  • 4-pin connector enables PWM speed control
  • Four mounting holes simplify installation

92 mm Maglev CPU Cooler Fan

The Zyvpee KDE1209PTVX is a 92 mm by 25 mm case fan built for CPU cooler mounts. It uses a maglev bearing and a 4-pin PWM connector for speed control. The 12 V, 4.4 W motor drives the black, non-LED frame. Buyers who need RGB lighting or a larger 120 mm form factor should look elsewhere.

Fits Standard 92 mm Cooler Mounts

Four mounting holes spaced for 92 mm coolers let the fan bolt directly onto compatible heatsinks. The 4-pin header plugs into a motherboard or fan controller for automatic curve management. No extra adapters or proprietary brackets are required. Builders using coolers with non-standard hole patterns cannot use this unit.

Includes Mounting Hardware Only

The package supplies the fan and four mounting screws for immediate installation. No software, RGB controllers or extension cables are bundled. The bare-metal approach keeps cabling simple for minimalist builds. Users wanting pre-applied vibration pads or a fan hub must source them separately.

Prednosti

  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W draw keeps power use low
  • 92 mm × 25 mm size fits standard 9225 mounts
  • 4-pin connector enables PWM speed control
  • Four mounting holes simplify installation

Špecifikácie

BrandZyvpee
SeriesKDE1209PTVX
ModelKDE1209PTVX
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions92*25MM

Otázky k tomuto produktu

What is the maximum power draw of the Zyvpee KDE1209PTVX fan under continuous load?

The fan draws 4.4 W at 12 V, so sustained operation stays at that power level.

How much noise and heat does the maglev bearing produce during all-day operation?

Maglev bearings run without mechanical contact, keeping noise and friction heat to a minimum.

Which motherboard header is required to run the 4-pin PWM connector?

A standard 4-pin PWM fan header on the motherboard or fan controller is needed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.