暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 92 mm maglev case fan 25 mm thick 4 pin connector

Zyvpee

Zyvpee KDE1209PTVX 92 mm 25 mm 4-pin maglev case fan

SKU CH-BSEZ-NHKK6

A 92 mm maglev case fan with a 25 mm profile, 12 V 4.4 W draw and a 4-pin connector for CPU cooler mounting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W draw keeps power use low
  • 92 mm × 25 mm size fits standard 9225 mounts
  • 4-pin connector enables PWM speed control
  • Four mounting holes simplify installation

92 mm Maglev CPU Cooler Fan

The Zyvpee KDE1209PTVX is a 92 mm by 25 mm case fan built for CPU cooler mounts. It uses a maglev bearing and a 4-pin PWM connector for speed control. The 12 V, 4.4 W motor drives the black, non-LED frame. Buyers who need RGB lighting or a larger 120 mm form factor should look elsewhere.

Fits Standard 92 mm Cooler Mounts

Four mounting holes spaced for 92 mm coolers let the fan bolt directly onto compatible heatsinks. The 4-pin header plugs into a motherboard or fan controller for automatic curve management. No extra adapters or proprietary brackets are required. Builders using coolers with non-standard hole patterns cannot use this unit.

Includes Mounting Hardware Only

The package supplies the fan and four mounting screws for immediate installation. No software, RGB controllers or extension cables are bundled. The bare-metal approach keeps cabling simple for minimalist builds. Users wanting pre-applied vibration pads or a fan hub must source them separately.

特長

  • Maglev bearing reduces friction for quieter operation
  • 12 V 4.4 W draw keeps power use low
  • 92 mm × 25 mm size fits standard 9225 mounts
  • 4-pin connector enables PWM speed control
  • Four mounting holes simplify installation

仕様

BrandZyvpee
SeriesKDE1209PTVX
ModelKDE1209PTVX
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions92*25MM

この商品に関する質問

What is the maximum power draw of the Zyvpee KDE1209PTVX fan under continuous load?

The fan draws 4.4 W at 12 V, so sustained operation stays at that power level.

How much noise and heat does the maglev bearing produce during all-day operation?

Maglev bearings run without mechanical contact, keeping noise and friction heat to a minimum.

Which motherboard header is required to run the 4-pin PWM connector?

A standard 4-pin PWM fan header on the motherboard or fan controller is needed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。